Need Barrell Threaded

[jmildoc]

I would like to have my .22 barrell threaded so that I can get a suppressor.

Who knows of a good place that is somewhat close to where I am?

I have seen the gunsmith list but many of them from what I can tell do not do threading....

 

[96firephoenix]

sears sells tap and dies sets...

 

[slow1911s]

Gary Growe in Columbus.

 

[U.S. Patriot]

Gary Growe in Columbus.

Bingo, you beat me too it. Gary does amazing work. I'll see if I can find his number for you. Nice thing is he is located close to 65.

 

[gunselman]

There is a guy in Indy that does good work. I will find his name.

 

[soljah777]

I had Elmores on the southside of Indy thread my Savage Mark IITR a few months ago. They farmed it out and had someone do the threading for them. Cost with a thread protector made from the barrel end was only $100 and I had it back in a week. I am very happy with the quality of the work done.

 

[Maverick]

Saltzman Gun Works in Tipton, IN. He did one for me last winter. Took about 10 days, cost about $80, did a nice job and provided a thread protector.

 

[Naptown]

Protech in Carmel, IN. Larry is the guys name. I'm picking up a 10/22 barrel in the next day or two that he threaded.

 

[indoorsoccerfrea]

Protech in Carmel, IN. Larry is the guys name. I'm picking up a 10/22 barrel in the next day or two that he threaded.

Protech? Do you have more info on them? Thanks!

 

[DaKruiser]

Protech? Do you have more info on them? Thanks!

INGO member "longshot308". Very good guy.

 

[GI JOE]

Anybody thread around NW side of 465 that's TRUSTworthy?

 

[minuteman32]

Larry Hoskins, Carmel, IN 317-250-9644. Has threaded an Advantage Arms & Buckmark bbl for me. Does a good job & was something like $60-80 each, including adapter & thread protector, respectively.

 

[GI JOE]

Right on! Many Grassy asses!

 

[sp3worker]

sears sells tap and dies sets...

Bad idea, if you want your suppressor to last very long DON'T do this.

If you want to drive a little bit hotrodtba can help you out.

 

[combat45acp]

I have been looking for a reputable barrel threading service in NWI, that said if you "send" it out, tornado technologies is hard to beat. I'm going to have to visit some of these guys listed here. Thanks for the post...

 

[hotrodtba]

If you want to drive a little bit hotrodtba can help you out.

For all the NE Indiana INGOer's, I am available to thread your barrel, engrave your lower, and other services. Here's some pics of my work.

10/22 Bull Barrel I threaded and made a thread protector for:

Thread adapter for an AC556 to go from 9/16-24 to 1/2-28:

AR15 lower engraving for SBR:

 

[KokomoDave]

Trent,
Can you do a barrel on a Beretta 92FS in 1/2 X28?

 

[hotrodtba]

Trent,
Can you do a barrel on a Beretta 92FS in 1/2 X28?

Shouldn't be a problem, as long as the barrel's diameter is over .500. Drop me a PM and we can work out the details. Thanks.

 

[combat45acp]

For all the NE Indiana INGOer's, I am available to thread your barrel, engrave your lower, and other services. Here's some pics of my work.

10/22 Bull Barrel I threaded and made a thread protector for:

Thread adapter for an AC556 to go from 9/16-24 to 1/2-28:

AR15 lower engraving for SBR:

Hmm, email me some prices, etc plz. Email is in signature.

 

[Gungho_1989]

Larry Hoskins, Carmel, IN 317-250-9644. Has threaded an Advantage Arms & Buckmark bbl for me. Does a good job & was something like $60-80 each, including adapter & thread protector, respectively.

This!
Larry just finished this for me.


https://www.indianagunowners.com/fo...and_she_s_nearly_done_my_remington_700_a.html

He's done alot of work for me and never a disappointment ever, I will be showing off his work tomorrow, we are now using Larry for all of our threading as well as Bolt gun work.
He will be picking up work at the shop from time to time now.