jsn_mooney
Marksman
Sorry if this has been asked before, I looked through numerous pages of old posts before starting this thread.
Does anybody have a good load already worked-up for the Max using 158gr XTP/Rem JSP or 180 Gr SSP bullets using H110/W296 or AA1680 Powder? I am running out of time to work up a load, and due to work constraints, I don't see it getting much better before the 17th.
If anybody is interested, I did play hookey from work a while back and did a little development on my .35REM/1.8" . I had the best groupings (right at an inch @100-sorry no pics) using 36.2 Gr of RL-7/180SSP over a GM210 primer. COL was book length. This was in a SB2 Handi. Be advised this load is over book max, but under what Layne Simpson wrote up years ago as ".35 Rem Super" loads. No signs of pressure in my gun. 22" bbl. was 2376 FPS.
Thanks in advance,
Jason
Does anybody have a good load already worked-up for the Max using 158gr XTP/Rem JSP or 180 Gr SSP bullets using H110/W296 or AA1680 Powder? I am running out of time to work up a load, and due to work constraints, I don't see it getting much better before the 17th.
If anybody is interested, I did play hookey from work a while back and did a little development on my .35REM/1.8" . I had the best groupings (right at an inch @100-sorry no pics) using 36.2 Gr of RL-7/180SSP over a GM210 primer. COL was book length. This was in a SB2 Handi. Be advised this load is over book max, but under what Layne Simpson wrote up years ago as ".35 Rem Super" loads. No signs of pressure in my gun. 22" bbl. was 2376 FPS.
Thanks in advance,
Jason