SS Colt Combat Commander 45 acp by Neil Keller of Kustom Ballistics.
Neil is a member of the American Pistolsmiths Guild, serving as Secretary and President, and the American Handgunner Club 100. In 2003, Neil was awarded Pistolsmith of the Year. A very prestigious award, coming from the membership of the American Pistolsmith Guild.
Base pistol is a SS Colt Combat Commander 45 ACP. All internals replaced with premium parts by Wilson, Brown, Nowlin, Wolf. Again no MIM here
Features of this pistol include
All checkering on frame done at 30 lpi
Serrate rear of slide and extractor at 40 lpi
Serrate top of slide at 40 lpi
Mill front of slide for BHP style cuts
Fit slide to frame
Recess and chamfer slide stop
Install and blend Wilson grip safety
Mill slide, fit and install BoMar sight
Install, radius, fit and blend Wilson thumb safety
Fit, radius and polish match barrel bushing
Competition trigger job
Fit and install ejector
Fit and install plunger tube
Fit and install firing pin stop
Tune, radius, polish and blend extractor
Throat barrel and polish feed ramp
Measure, true and polish breech face & chamfer firing pin hole
Debur trigger track in frame, resurface and polish sear
Polish disconnector
Polish rear of trigger stirrup
Fit and install new slide stop
Slim Coco Bolo grips
$1850.00 plus shipping
[url=https://postimages.org/]
[/url
]
[url=https://postimages.org/]
[/url
]
[url=https://postimages.org/]
[/url
]
Neil is a member of the American Pistolsmiths Guild, serving as Secretary and President, and the American Handgunner Club 100. In 2003, Neil was awarded Pistolsmith of the Year. A very prestigious award, coming from the membership of the American Pistolsmith Guild.
Base pistol is a SS Colt Combat Commander 45 ACP. All internals replaced with premium parts by Wilson, Brown, Nowlin, Wolf. Again no MIM here
Features of this pistol include
All checkering on frame done at 30 lpi
Serrate rear of slide and extractor at 40 lpi
Serrate top of slide at 40 lpi
Mill front of slide for BHP style cuts
Fit slide to frame
Recess and chamfer slide stop
Install and blend Wilson grip safety
Mill slide, fit and install BoMar sight
Install, radius, fit and blend Wilson thumb safety
Fit, radius and polish match barrel bushing
Competition trigger job
Fit and install ejector
Fit and install plunger tube
Fit and install firing pin stop
Tune, radius, polish and blend extractor
Throat barrel and polish feed ramp
Measure, true and polish breech face & chamfer firing pin hole
Debur trigger track in frame, resurface and polish sear
Polish disconnector
Polish rear of trigger stirrup
Fit and install new slide stop
Slim Coco Bolo grips
$1850.00 plus shipping
[url=https://postimages.org/]
[/url]
[url=https://postimages.org/]
[/url]
[url=https://postimages.org/]
[/url]
Last edited:
