Easiest way is to saw slots in the side of a 2x4 with a circular saw.
I was thinking you could staple/nail a clothes pin to the edge of a wooden target hanger
Easiest way is to saw slots in the side of a 2x4 with a circular saw.
. I was thinking you could staple/nail a clothes pin to the edge of a wooden target hanger
2 shots first card, 4 shots second
I tried today, but just kept punching holes in the cards. How do you get your bullets to go sideways?
A long ways off from Deo but I'm happy I actually did it!
7 yards off-hand on the 19th shot. I stapled it to the side of a target stand upright.
View attachment 87366
View attachment 87367
Want to make this a bit more interesting? Try hanging the card from a three foot long piece of fish line....
Good shootin'!A long ways off from Deo but I'm happy I actually did it!
7 yards off-hand on the 19th shot. I stapled it to the side of a target stand upright.
View attachment 87366
View attachment 87367
Nice shooting guys. I didn't do quite as well with my first effort.
First shot came in high, pushing the card aside (or the card was off angle) and finally put a hole dead center of the cut in the cardboard holding the card. Just clipped the corner off.
Finally got the second card on either the 15th, 16th or 17th shot (I quit walking over and checking every shot) and left it connected by a thread.
25' from muzzle to card, one hand standing.
I will try again on another day.
Want to make this a bit more interesting? Try hanging the card from a three foot long piece of fish line....
And I have noticed it's all wheel guns so far.
It just seems appropriate. I'll give the Buckmark a try next.And I have noticed it's all wheel guns so far.