Has anyone tried the ez rail also known as the tick for their 92fs and has it performed as intended with a light without marring the finish on the frame where it mounts?
They advertise that it doesn't scratch your gun's finish but I would like to hear from actual user feedback before i commit...
Hello, I have a Type 54 Tokarev without the mandated import safety up for trade in 7.62x25mm. The import safety trigger has been replaced with a genuine Russian example.
This surplus pistol has some pitting on the slide while the barrel also has some frost which is the condition that it was in...
Hello everyone, I'm hoping to find someone who has an Interarms made Walther PPK that they may be willing to part with to have cash in hand to buy something else.
I used to have a PPK that a "friend" I knew was supposed to sell back to me but he never did, this was several years ago and I...
Closing for now as I have made arrangements to buy a fellow member's snubby. Thanks
Testing the waters as folks like to say if I can find a good to excellent condition Sig Sauer P228 with no rail in 9mm in or close around Muncie.
Ideally looking for a west german with triple serial numbers...
Hello everyone, I wanted fellow members input on if its safe to store a pistol in the safe in a hardcase that has no foam in it without fear of rust or corrosion?
I know cases with foam draw in and retain moisture but what are the circumstances when its just a hardcase such as the earlier...
Not sure if this has been covered yet but a company which I assume is Tisas using the Inglis name are releasing new Hi Power clones that are supposed to be period correct.
https://www.guns.com/news/2024/01/08/inglis-reborn-to-market-period-correct-hi-powers
The L9A1 clone with lanyard loop and...
Hello everyone, would a pic mount for a carry handle for the ar15 along with a low profile mount for the Romeo 5 be all I need to mount it directly to a carry handle and could I also still use my iron sights if I wanted?
I could mount it to the flatop itself without the carry handle.... but I...
Hello everyone, I wanted to ask if anyone has ever tried installing a PPQ threaded barrel kit into a Walther P99 and it functioning correctly with a suppressor? Thanks
Hello, I wanted to ask if anyone else has ever had issues with a grip panel being loose on a Tokarev from the metal bracket on the grip itself being wobbly and if there was any way to tighten it up or just buy a new grip panel? Thanks
I have ten or so Chinese made stripper clips made for the Mosin Nagant that I've had for awhile and none will line up with the rifle to feed ammo into the magazine. All will hold cartridges however.
I wanted to ask if this is an issue that can be fixed by trying to bend the clips outward or if...
I wanted to ask how well a BHP does when used with a can as I am a little bored with my current hosts which are 92fs and G17.
I am wondering how well the Browning does compared to the other two as a threaded barrel is the only thing I need which also I would love any comment on how well made...
After many years without one.... I am finally ready to get another revolver I think and I want it to be a single action army as I have never owned the type before.
I wanted to ask people on the quality of Cimmaron made Piettas? I have a blued one lined up to purchase with fuax stag and an...
Good evening everyone, I wanted to ask for anyone who has done it before on how difficult replacing the toggle link on a P08's toggle assembly is to do?
My Luger is a mismatch that has an adjustable rear sight that I would like to replace for the fixed V notch rear sight.
The rear sight is...
Hello everyone, I wanted to ask because I don't know one way or the other....if you can swap a pair of BCG's in two AR15 rifles without ill effect to them during shooting?
I have an a2 rifle clone with a nickel boron BCG i want to put in a m4orgry with a nickel boron LPK so that they match...
I wanted to ask if anyone here has first hand knowledge on carrying a Sig P229 in a shoulder holster and if it conceals well or akwardly with it flopping around?
I've been contemplating ordering a Galco miami shoulder rig to free up the weight I feel with the pistol when carrying it iwb.. but...
Wanted to ask if anyone knew of a source for the Talo M1 carbine walnut stock set made for the Ruger 10/22? I would love to mount one on my Ruger for the M1 look.
Wanted to ask if anyone knew of easy ways to removing plastic usgi 1911a1 grips from the frame without risk to damage or cracking? They are fit on pretty snug on the left side.
The first set of ww2 keyes grips i had were without the rings around the screw holes and the left panel cracked in...
Seeing if anyone has a VP70Z they might wanna sell for a reasonable price. Been wanting to add one to my collection for awhile now. Not picky if the gun has the original box or not so long as its in good shape overall. Ftf in or around Muncie is preferable. Thanks.
Looking for a stripped lower by RRA to swap out on my a2 clone that has a RRA upper to make the rifle match. I am interested in one like this one pictured as for markings. Prefer in or around Muncie. Thanks
Not interested in any other lowers