The Czickness LII….it is the grey time of year. Tungsten Grey that is…

The #1 community for Gun Owners in Indiana

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Status
    Not open for further replies.

    T-DOGG

    I'm Spicy, deal with it.
    Site Supporter
    Rating - 99.6%
    263   1   0
    Feb 4, 2011
    17,550
    149
    New Haven
    Ordered materials this morning to make a custom fixture designed specifically for milling optics cuts on slides. It will be a 6"x12"x1" 6061 aluminum plate that will mount directly to my rotary table. If it comes out the way I want, it will allow me to mill just about any slide for just about any optic I want, while making the set up and overall time drastically less. This idea started after a few people asked about the Holosun K series optic cut, which involves cutting a curve at the front and rear of the footprint (stupid design). I've done that specific cut on several occasions and it was very time consuming on my manual mill (CNC mill not so much!). I will start a separate thread on this little project, so stay tuned!
     

    patience0830

    .22 magician
    Site Supporter
    Rating - 96.6%
    28   1   0
    Nov 3, 2008
    18,127
    149
    Not far from the tree
    Ordered materials this morning to make a custom fixture designed specifically for milling optics cuts on slides. It will be a 6"x12"x1" 6061 aluminum plate that will mount directly to my rotary table. If it comes out the way I want, it will allow me to mill just about any slide for just about any optic I want, while making the set up and overall time drastically less. This idea started after a few people asked about the Holosun K series optic cut, which involves cutting a curve at the front and rear of the footprint (stupid design). I've done that specific cut on several occasions and it was very time consuming on my manual mill (CNC mill not so much!). I will start a separate thread on this little project, so stay tuned!
    From the mind of the Spicyweiner.
    :coffee: and raisin bran with a banana and some honey this morning. Gonna replenish the aviary food supply shortly. Hoping for a warmer day. Freight has been slow so I'm PTO'ing my Friday again this week. Walmart stock about to split 3 for 1 soon if anyone wants to bet on them. Not insider knowledge but just a heads up.
     

    MindfulMan

    Grandmaster
    Site Supporter
    Rating - 100%
    6   0   0
    Feb 14, 2016
    17,870
    113
    Indiana
    I have a Jericho that I want to get cerkoted. This gives me ideas. I had kept going back and forth between like a burnt bronze, Navy Blue, Titanium, and a few other colors. It is going to be two tone, just because I like that look.

    Very cool !

    @ditcherman DM will probably flaunt the "Midnight Massada", just to make me squirm like a toad ! :cool:
     

    WebSnyper

    Time to make the chimichangas
    Rating - 100%
    59   0   0
    Jul 3, 2010
    15,746
    113
    127.0.0.1

    zachcz

    CZ is just better.
    Site Supporter
    Rating - 100%
    67   0   0
    Jul 2, 2019
    1,463
    97
    Shelbyville
    Spent a couple hours at the range today on my day off shooting the Rock Island double stack 1911 shooting it side-by-side with a prodigy Rock Island kicked the prodigy butt in every area. I was kind of shocked, especially considering the price difference d I did try a new to me CZ p10. Took the shark out just to show a friend the Saracco job it’s a site to be seen in the sun. I don’t do pictures as well. It needs to have a photo shoot sometime with you all in your fancy cameras.
     

    ditcherman

    Grandmaster
    Site Supporter
    Rating - 100%
    22   0   0
    Dec 18, 2018
    7,807
    113
    In the country, hopefully.
    Very cool !

    @ditcherman DM will probably flaunt the "Midnight Massada", just to make me squirm like a toad ! :cool:
    I haven’t forgot about getting it in your hands sometime!
    Every time I think works gonna slow down I find something else to do.
    IMG_6792.png

    I did make a few changes to it though.
     
    Status
    Not open for further replies.
    Top Bottom