Official NFA pic thread

[praff]

Just a little teaser pic of some post dealer samples. Everything up there is select fire except for the 22 pistol on the left and the two USPSA open guns on top. The brass knucks are full semi-automatic.....

Changing my license to an 07/02 was the best thing I ever did.

 

[danatkins]

If I was home more I would probably have one of those licenses

Sent from my VS995 using Tapatalk

 

[pharmboy]

 

[pharmboy]

And a suppressed 7.62x39 upper, too...

 

[magic man]

 

[snorko]

More AllenM magic. Paperwork should go out early next week to start the long wait. SLR-107UR Krink with Plum factory furniture and a Vepr 12 cut to 14". I have Izzy made walnut furniture for the Vepr.

 

[Yamadog35]

Rugged Obsidian 9 in short configuration

 

[jason867]

Do you miss having a rear iron sight for backup, or to help you find the dot?

I'm getting an rmr on my glock soon, and thought about deleting the rear iron sight, and just painting a white line or dot on the back of the rmr to use as a makeshift backup rear sighting point (in case the rmr failed in an emergency )

Rugged Obsidian 9 in short configuration

 

[Yamadog35]

Do you miss having a rear iron sight for backup, or to help you find the dot?

I'm getting an rmr on my glock soon, and thought about deleting the rear iron sight, and just painting a white line or dot on the back of the rmr to use as a makeshift backup rear sighting point (in case the rmr failed in an emergency )

The red dot on the G17 in my photo is a Leupold Delta Point Pro. You can get a model that has a rear sight that hangs off the back of the optic but I didn't like the look of that so I went without. What you can't see is that I have a thin white vertical line on the back of the optic that acts as the rear sight (dot the "I" with the front sight). I used a very thin pin stripe tape after measuring and lightly etching a line into the optic itself. I find that it works fine. I also have an RMR on a G19 and do have the rear sight in place behind the optic on that gun and recommend it.

Since this is a picture thread . . . here's the same suppressor but on a different host.

 

[Sterndern11]

Frankenstein AR with Liberty Mystic-X
Frankenstein currently running Aero precision upper, RRA lower and A2 stock with balanced weight, PSA BCG, 20" Larue barrel and grip, Gibbz handguard, odinworks adjustable gas block forward assist and charging handle, triggertech trigger, JP rifles SC spring, accurizer plug, threaded trigger group pins, SWFA SS 16x fixed in Aero precision mount, sitting on Burris bipod.

Shoots a very quiet 1/2 MOA at 200 yards with 68grn SMK.

 

[Frank_N_Stein]

View attachment 68198

Frankenstein AR with Liberty Mystic-X
Frankenstein currently running Aero precision upper, RRA lower and A2 stock with balanced weight, PSA BCG, 20" Larue barrel and grip, Gibbz handguard, odinworks adjustable gas block forward assist and charging handle, triggertech trigger, JP rifles SC spring, accurizer plug, threaded trigger group pins, SWFA SS 16x fixed in Aero precision mount, sitting on Burris bipod.

Shoots a very quiet 1/2 MOA at 200 yards with 68grn SMK.

Frank_N_Stein approves.

 

[jason867]

What you can't see is that I have a thin white vertical line on the back of the optic that acts as the rear sight (dot the "I" with the front sight). I used a very thin pin stripe tape after measuring and lightly etching a line into the optic itself. I find that it works fine.

If it wouldn't trouble you too much, I'd love to see a pic of your glock 17 with your white line lined up with the front sight. I've heard of others doing something similar.
I assume your front sight is suppressor height? How does it's POA compare to its POI?

You can PM me if you prefer.

 

[JollyMon]

 

[porks]

Two of my SBRs

 

[nrgrams]

Two of my SBRs

Great looking shorties.

 

[Trigger Time]

Two of my SBRs

What rail is on your top one? Nice rifles.

 

[nrgrams]

What rail is on your top one? Nice rifles.

KAC that's been cut?

 

[porks]

Great looking shorties.

Thanks!

 

[porks]

What rail is on your top one? Nice rifles.

KAC that's been cut?

It is a KAC URX4 that I cut to make room for the FSB.

 

[Ggreen]

Amer-Mfg Ghost wind on the ar and a Thunderbeast 22td on the ruger bolt