Did you hook up a case feeder to it?Got my rollsizer today, roll sized 80 lbs of 9mm View attachment 316969
Did you hook up a case feeder to it?
Did you hook up a case feeder to it?
Thats pretty much what I did to begin with. I ran a piece of vinyl tubing from a 650 to feed mine. Then I happened on a Dillon case feeder at a church thrift store in Anderson for $60.00 along with a pos tumbler.Really fast hands
I was able to put it on a shelf under my 650 & use that casefeeder.
I would like to get a dedicated feeder for it. A fine member here has one for a fair price, still trying to decide if I really need it or just pull one of my existing ones to do a run.
Thats pretty much what I did to begin with. I ran a piece of vinyl tubing from a 650 to feed mine. Then I happened on a Dillon case feeder at a church thrift store in Anderson for $60.00 along with a pos tumbler.
Using a ring roller has brought my gauge failures to almost zero.
Good, between that and a judicious taper crimp I have few issues anymore.I had tarnished/ugly brass set aside to load for shooting when retrieval may be difficult. Rolled & loaded 180 rounds of that & only had 1 fail the gauge, chambered it & the coating on the bullet was marred on 1 side indicating that it may be been a wonky projo.
The majority of the rounds fell in & fell out of the gauge, not what I had experienced in the past.