So.. what are you reloading at the moment??

[Max Volume]

Is that one of the .38/55’s or a .45/70? I’ve always wanted a big rolling block. I’ve got a couple of .22’s and a .32 rimfire that I am going to convert to 32 SWL.

The rolling block is a 45-70. The 38-55's are all lever guns. Top one is a Marlin 1893 take down made in 1898 if I remember
correctly. Middle is a Winchester 94 made in 1895 and the bottom is a Chief Crazy Horse.

 

[Max Volume]

12 gauge trap rounds.

 

[rb288]

I have been working on reloading 190gr Sub-X for my 8.25" SBR.
It seems to be quite the challenge.

 

[AndreusMaximus]

I have been working on reloading 190gr Sub-X for my 8.25" SBR.
It seems to be quite the challenge.

How do you mean? I've been wanting to load some of those myself, if I can ever find any in stock, so I'm curious about your experience.

 

[rb288]

How do you mean? I've been wanting to load some of those myself, if I can ever find any in stock, so I'm curious about your experience.

It has been hard to get the thing to cycle.
With a single round, it fires, ejects and locks back properly.
When 2 or more in the mag, it would not feed the second round and jammed.
It took awhile to realize that standard 556 mags, which work great with supersonics, just will not work with subs 180gr or greater.
Got a Lancer dedicated 300blk mag and it runs subs like a well oiled machine.
I have found 1680 to be the most consistent powder for those subs at about 1000fps.

 

[1nderbeard]

Finished up some 357 loads with Hornady 158gr hollow points and then made some 38 special plus p with the same projectile.
Shot the 38spec; they have some good zip in them for sure.

 

[gcoop]

Finished a final trim and champhering and case gauge check on 250 cases of 300 Blackout brass yesterday. Put 200 once fired cases of 45 ACP brass in the tumbler, today for later this winter sometime.

 

[BackFromDC]

Working on a lot of 9mm and will move onto .223/5.56. Hoping to titrate a 9mm load that's good for suppressor use.

 

[VinceU1]

So my nephew wants to use my sporterized Mauser in .308Win. Only problem is I don't have ANY .308Win...

Break out the tools boys, guess what I'm building???

Wheeeee!!!

 

[Leadeye]

32-40 to feed the Marlins

 

[indyjohn]

My rig sits quietly in the garage, awaiting the results of a semi-new 5,56 recipe I worked up for midrange (300-600). I had hopes early this year to try it out at Atterbury with the CIHPRS. But, again, life got in the way of that hope.

 

[Yangos45]

Just finished some 44spl for a range trip tomorrow. Taking advantage of the halfway decent weather we're having to keep the old wheel guns exercised.

 

[tomcat13]

308 Win w/Once fired & trimmed Milsurp brass(7.62 x 51)
Found some of these on the back of the shelf

Set over IMR 4064 w/ W-W LR Primers to touch em off.
Don't know if I can wait til Spring for use!

 

[yetti462]

Been rolling 6.5 cm for my buddy, son and I.

 

[indyblue]

Been rolling 6.5 cm for my buddy, son and I.

Where you find LRP's for them? I've 100 cases and projectiles (147gr HDY ELD's) that need to be loaded.

 

[yetti462]

Where you find LRP's for them? I've 100 cases and projectiles (147gr HDY ELD's) that need to be loaded.

Living off my hoarding stock of $20/1000 primers.

 

[VinceU1]

Need some .308Win for WhiteTails. So, 150gr Nosler Partitions, Winchester brass, CCI large rifle primers and IMR4064 powder. Season is coming soon...

 

[Purdue1991]

Been reloading 308s and 6.5 Grendel's lately for deer hunting. Using Hornady 150gn SSTs on the 308. They shoot great. Using Sierra 120gn Pro Hunter's on the 6.5 Grendel. They stop deer in their tracks...

 

[bgcatty]

.44 Magnum for use in 1894 Marlin using IMR 4227 and Hornady 240 grn XTP projectiles.

 

[edwea]

300 blackout with 110 gn Barnes Tac-tx over 19.5 gn of h110 for gun season. Decided to take a shot at 50y with one to see if these held the same zero as the last batch. I think they'll work.