Elkhart South Bend Area
I am selling this with everything needed to load and shoot, minus hazmat components.
This rifle is essentially brand new. Been fired less than 150 rds. Started with Lapua 6.5 brass, necked down. After ladder test I started seating depth and came to 2.080"CBTO, loaded confirmation rounds, then decided to switch to Alpha 25 Creed head stamp. Never fired the loaded rounds.
Once I decided to use Alpha I stopped the Lapua load development. I completed the ladder test w/ Alpha, then loaded seating depth, but never had a chance to shoot them.
Here is a list of the package:
Components:
$5500 $5200 shipped to your FFL. I will ship the non FFL items to your direct. *Bipod not included*, I prefer to sell as a whole package. If face to face I will discount.
If complete rifle sells, I’ll break up components.
This cost me $7500 to build last year.
I am selling this with everything needed to load and shoot, minus hazmat components.
This rifle is essentially brand new. Been fired less than 150 rds. Started with Lapua 6.5 brass, necked down. After ladder test I started seating depth and came to 2.080"CBTO, loaded confirmation rounds, then decided to switch to Alpha 25 Creed head stamp. Never fired the loaded rounds.
Once I decided to use Alpha I stopped the Lapua load development. I completed the ladder test w/ Alpha, then loaded seating depth, but never had a chance to shoot them.
Here is a list of the package:
- Foundation Centurion Dark Distress w/ Arca Rail
- Impact Precision 737R Action
- Brux 1:8, MTU, Burnt Bronze, 26", Chambered by Alpha and Omega with JGS 25 Creedmoor Reamer
- EC Tuner Brake
- Huber Concept 2 stage 8oz up 8oz break
- Athlon Eres 4.5-30x 34mm tube, 56mm objective, MKM machine caps, ARD, throw lever, bubble level
- Zeiss scope rings w/ bubble level built in
Components:
- Lapua 6.5 LRP 101 pieces virgin
- Lapua 6.5 SRP 195 pieces condition below:
- 81 pieces, Virgin, sized, trimmed (Henderson)
- 40 pieces virgin, sized, trimmed (Henderson), 41.5gr H4350 (V4 +-.02gr), GM205, Seated 2.085" CBTO
- 34 pieces 1x fired, deprimed, cleaned, annealed (AMP), resized, trimmed (Henderson), primed (CPS) with GM205
- 40 pieces, 1x fired, still in fired state
- Alpha Munitions 398 pieces condition below:
- 200 pieces unopened
- 100 opened but virgin
- 82 pieces trimmed (Henderson), loaded 42.5gr H4350 (2903FPS Magneto V3), at seating depths
- 30 pieces loaded for seating depth 3 rounds of each loaded from 2.081"CBTO-2.105"CBTO in .003" increments.
- 10 pieces loaded to 2.105"CBTO for back up in seating depth test( I test at home, I could size down if needed during test)
- 10 pieces loaded to 2.085"CBTO using Redding .283 bushing on once fired brass (Annealed,size, trim)
- 10 pieces loaded to 2.085"CBTO using Redding .283 bushing virgin brass
- 10 pieces loaded to 2.085"CBTO using SAC .283 bushing virgin brass
- 5 pieces loaded to 2.080-2.085 for fouling
- 7 pieces loaded to 2.085
- 16 pieces in once fired state
- 12 unopened 100 count boxes Berger 135gr Hybrid
- 1 100 count box Berger 135gr Hybrid half full
- 3 100 count box Berger 133gr Hunter unopened
- 1 Redding type S bushing die
- Redding Type S bushing size .282, .283(Titanium)
- SAC Bushing .279, .280, .283
If complete rifle sells, I’ll break up components.
This cost me $7500 to build last year.