I have been doing a some Gray Guns triggers on Sig P320's and also I have installed the Apex Kit as well. If you are on the fence whether or not this is a good purchase maybe this will help. I have done a few now and Saturday I did a compact for a customer, so I thought I would show it.
Here is the before and after results. Owner only sent me the lower so I had to provide a donor slide, which meant I could not mate the sear and striker but still the final results are impressive.
The kit contains a new sear, trigger, pre travel reduction sleeve and sear springs. The trigger is the heart of the kit, is completely redesigned as far as connecting with the trigger bar.
The sear....as much as I can tell from visual inspection looks exactly like the factory sear except that the striker face has been re cut at different angle.
I don't know if anything else has been done to it but it works, along with the lightened springs.
Not only is trigger pull weight dropped but pre and post travel are significantly reduced. The Apex kit "helped" but no where close to Gray Guns Kit
trigger candidate.
I believe it has been fired already
May not be needed but I polish the surface areas where these parts contact
And with out being able to mate the sear and striker it drops right at 3 lbs
on my X-Carry after mating the sear and striker in dropped a couple more ounces
Here is the before and after results. Owner only sent me the lower so I had to provide a donor slide, which meant I could not mate the sear and striker but still the final results are impressive.
The kit contains a new sear, trigger, pre travel reduction sleeve and sear springs. The trigger is the heart of the kit, is completely redesigned as far as connecting with the trigger bar.
The sear....as much as I can tell from visual inspection looks exactly like the factory sear except that the striker face has been re cut at different angle.
I don't know if anything else has been done to it but it works, along with the lightened springs.
Not only is trigger pull weight dropped but pre and post travel are significantly reduced. The Apex kit "helped" but no where close to Gray Guns Kit
trigger candidate.
I believe it has been fired already
May not be needed but I polish the surface areas where these parts contact
And with out being able to mate the sear and striker it drops right at 3 lbs
on my X-Carry after mating the sear and striker in dropped a couple more ounces