I have a dillon square deal press with dies for 9mm and 38/357. I have a toolhead for each set of dies which allows for a quick change between dies/calibers. This is still a great press. I have two Dillon presses and needing the bench space back so selling this one. If you need me to show you the basics on how to use this press I very open to showing you how to use this press.
$325$300
Pricing this out new would be:
$370 - press with one set of dies
$80 - caliber conversion with dies
$30 - tool head (has second set of dies in it)
$30 - tool head extra
$510 - if you bought all of this new.
I know this is not new but will Dillon backing up their product they way they do you do not need to worry about new vs used.
$280 without extra toolheads and 38/357 dies.
Picture of other dies in 2nd toolhead and found 3rd toolhead also. The toolhead cost $30 new (http://www.dillonprecision.com/#/content/p/9/pid/23510/catid/48/Square_Deal___039_B__039__Toolhead
Large primer assy in picture also.
$325$300
Pricing this out new would be:
$370 - press with one set of dies
$80 - caliber conversion with dies
$30 - tool head (has second set of dies in it)
$30 - tool head extra
$510 - if you bought all of this new.
I know this is not new but will Dillon backing up their product they way they do you do not need to worry about new vs used.
$280 without extra toolheads and 38/357 dies.
Picture of other dies in 2nd toolhead and found 3rd toolhead also. The toolhead cost $30 new (http://www.dillonprecision.com/#/content/p/9/pid/23510/catid/48/Square_Deal___039_B__039__Toolhead
Large primer assy in picture also.
Last edited: