WTS/WTT CETME with mags, battle pack german DAG 308, 120 rounds wolf, 56 rounds 308 tracer, 10 mags w/ 2 spare springs and followers, 8 - 2 mag german HK pouches with the web gear adaptor.
Let me know if you need more pictures.
CETME
I puchesed it with the typical CETME double feed/jam problems. I put $120 of gun smithing into the rifle. We moved the Mag Latch up 3.5mm and ground the mag well so the mag would ride forward in the well allowing the rounds to enter the chamber perfectly. I have never had a misfire or malfunction since the smithing was done on it. I have done 2 stress shoots with this rifle, movement, rifle action drills, etc with the rifle perfoming perfectly. I have sent 300 plus though it since. The previous owner was frustrated with it misfire problems and never finished off his first and only box. Based on this information, I would estimate the round count at below 400.
Trade
Willing to look at trades in the AK74 variant rifle.
Sell
Want to move to a smaller caliber. I like the AK platform and currently have a Tontel. I would like to purckase an Arsenal SGL31-61 so would like to sell it all to one buyer. Would not like to break the items up.
$650 OBO for all. don't want to break it apart just yet, but if you have an idea, will talk about it. PM me.
FTF only with LTCH. Fort Wayne Area, am willing to travel short distance.
[URL="http://www.flickr.com/photos/70824045@N02/6408145145/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408142247/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408143269/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408143555/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408144045/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408144223/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408142975/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408142741/"]
the following is added per request:
This is a close up of the Latch modification done to raise the mag seating up:
[URL="http://www.flickr.com/photos/70824045@N02/6408146135/"]
Ejection port clip. Helps to keep the signature 1.5 mile launching of the expended shell down to 10 feet. Works great if you are a reloader too because it keep the brass from getting damaged.
[URL="http://www.flickr.com/photos/70824045@N02/6408145493/"]
Reciever Stamping:
[URL="http://www.flickr.com/photos/70824045@N02/6415723629/"]
http://www.flickr.com/photos/70824045@N02/6415723629/
Let me know if you need more pictures.
CETME
I puchesed it with the typical CETME double feed/jam problems. I put $120 of gun smithing into the rifle. We moved the Mag Latch up 3.5mm and ground the mag well so the mag would ride forward in the well allowing the rounds to enter the chamber perfectly. I have never had a misfire or malfunction since the smithing was done on it. I have done 2 stress shoots with this rifle, movement, rifle action drills, etc with the rifle perfoming perfectly. I have sent 300 plus though it since. The previous owner was frustrated with it misfire problems and never finished off his first and only box. Based on this information, I would estimate the round count at below 400.
Trade
Willing to look at trades in the AK74 variant rifle.
Sell
Want to move to a smaller caliber. I like the AK platform and currently have a Tontel. I would like to purckase an Arsenal SGL31-61 so would like to sell it all to one buyer. Would not like to break the items up.
$650 OBO for all. don't want to break it apart just yet, but if you have an idea, will talk about it. PM me.
FTF only with LTCH. Fort Wayne Area, am willing to travel short distance.
[URL="http://www.flickr.com/photos/70824045@N02/6408145145/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408142247/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408143269/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408143555/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408144045/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408144223/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408142975/"]
[URL="http://www.flickr.com/photos/70824045@N02/6408142741/"]
the following is added per request:
This is a close up of the Latch modification done to raise the mag seating up:
[URL="http://www.flickr.com/photos/70824045@N02/6408146135/"]
Ejection port clip. Helps to keep the signature 1.5 mile launching of the expended shell down to 10 feet. Works great if you are a reloader too because it keep the brass from getting damaged.
[URL="http://www.flickr.com/photos/70824045@N02/6408145493/"]
Reciever Stamping:
[URL="http://www.flickr.com/photos/70824045@N02/6415723629/"]
http://www.flickr.com/photos/70824045@N02/6415723629/
Last edited:
