-
Be sure to read this post! Beware of scammers. https://www.indianagunowners.com/threads/classifieds-new-online-payment-guidelines-rules-paypal-venmo-zelle-etc.511734/
AR-15 and M-16 Show And Tell
- Thread starter JosephR
- Start date
The #1 community for Gun Owners in Indiana
Member Benefits:
Fewer Ads! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
- Status
? Do they have a warehouse here?
Dr. Pretorius
Plinker
My Bushmaster Gas Piston M4
Frank_N_Stein
Grandmaster
Finally got an AR
After much saving and searching for the right parts, I finally bought an AR. DPMS upper, RRA LAR-15 lower with RRA parts kit. I got the upper and LPK from Law Enforcement Firearms, and the stripped lower from Michiana. I don't have a rear sight yet, but I just ordered a UTG one from MidwayUSA. I went with the A2 stock because even fully extended I think collapsible stocks are too short for me.
Assembling the lower wasn't bad. I didn't lose the front pivot pin detent or spring. I boogered up the bolt catch roll pin and the butt stock screw, but I have replacements on the way from Midway with the sight. As soon as the parts come in I will be sighting it in.
After much saving and searching for the right parts, I finally bought an AR. DPMS upper, RRA LAR-15 lower with RRA parts kit. I got the upper and LPK from Law Enforcement Firearms, and the stripped lower from Michiana. I don't have a rear sight yet, but I just ordered a UTG one from MidwayUSA. I went with the A2 stock because even fully extended I think collapsible stocks are too short for me.
Assembling the lower wasn't bad. I didn't lose the front pivot pin detent or spring. I boogered up the bolt catch roll pin and the butt stock screw, but I have replacements on the way from Midway with the sight. As soon as the parts come in I will be sighting it in.
Last edited:
My home built KISS Carbine.
It's a Superior Arms lower with a Stag Arms lower parts kit.
The barrel is a 1/9 Bushmaster Superlite.
The A1 upper is a Colt from a m16 teardown I got at a gun show.
4 position stock is a Model 1, and the pistol grip is a used m16A1 grip.
I refinished it with Norrell's dark grey, to match all the different components.
It's a Superior Arms lower with a Stag Arms lower parts kit.
The barrel is a 1/9 Bushmaster Superlite.
The A1 upper is a Colt from a m16 teardown I got at a gun show.
4 position stock is a Model 1, and the pistol grip is a used m16A1 grip.
I refinished it with Norrell's dark grey, to match all the different components.
SavageEagle
Grandmaster
- Apr 27, 2008
- 19,568
- 38
Spikes .22lr Upper on the Cav Arms MKII Lower...
Bushy HBAR 5.56 Upper on a Roggio Lower....
Bushy HBAR 5.56 Upper on a Roggio Lower....
Here is my Colt 6920. I had the acog rcom4 on it, but I sold it and went back to Iron sights. KAS and VFG And a 2 point VTAC sling. It was my second AR, but is the one I took to the Boone County armorer's class with me... now that I have it dialed in, it's dead on!
decided to mod my AR today to make it a little more tacticool.
took the carry handle off and added an MBUS i picked up at Bradis this morning. then i mounted my new BSA red dot/flashlight/laser combo. next on the list is probably a change in handguards.
took the carry handle off and added an MBUS i picked up at Bradis this morning. then i mounted my new BSA red dot/flashlight/laser combo. next on the list is probably a change in handguards.
redbarontoys
Plinker
- Jul 21, 2009
- 52
- 6
This is my work in progress. As you can see it still needs a little. I chose the AERO PRECISION stripped lower mainly because I like the fact it is marked as multi caliber. The internals are DPMS. I will be changing the trigger, grip and buttstock at some point. My wish list is for at least 3 uppers, 7.62x39, 5.56, and .45ACP. Maybe others as the budget allows.
Last edited:
The SKULL Mag button can be found here
CNC Skull Magazine Release Button [SKULL_BUTTON] - $14.95 : Parallax Tactical, Your NorCal San Jose E.B.R. Source!
CNC Skull Magazine Release Button [SKULL_BUTTON] - $14.95 : Parallax Tactical, Your NorCal San Jose E.B.R. Source!
Mag release is from Valkyrie Tactical, they call it a skull mag release. To me it looks more like a ZombieThey are out of stock right now.
KAC parts other than the lower and triggerguard are the rail covers, the M4 RAS, the 600m rear buis, I also have 1 more KAC 2 stage match trigger that I'll probably install.
The upper on it right now is a Colt 6731 that had the barrel cut back and a permanet FH attached. It is a 1/9 twist postban version of the 6721 upper.
So I guess this is a KAColt carbine
Update...........
Went to the box-o-parts to get what I thought was my last KAC 2 stage match trigger and here is what I found.
it multiplied
So I installed one of them in the KAColt and put the other back in the box for the magic to happen again.
I have (almost) finished a 9mm AR build.
Unfortunately my camera seems to be broken, so here is a lousy cellphone photo.
RockRiver lower + RockRiver A4 upper + RockRiver 9mm bolt ramped by Adco + Spikes 16" 9mm barrel + VM Hytech mag block (uses unmodified Uzi magazines) + YankeeHill rifle-length handguard + cheapish TruGlo red dot (for now?) + etc.
Unfortunately my camera seems to be broken, so here is a lousy cellphone photo.
RockRiver lower + RockRiver A4 upper + RockRiver 9mm bolt ramped by Adco + Spikes 16" 9mm barrel + VM Hytech mag block (uses unmodified Uzi magazines) + YankeeHill rifle-length handguard + cheapish TruGlo red dot (for now?) + etc.
- Status
