Ugggh... the 10/22 is a disease

[bwframe]

I used an empty 22LR case epoxied on a 10/32 stainless bolt. Lock tite it in to the hole I drilled and tapped in the old mag release.

Honestly, you guys are mechanical wizards!
For me though, as an owner/operator of a small business, I have to weigh time spent vs time lost (not producing income.) In this conundrum, I bought an extended delrin replacement for $7. Took ten minutes to drop in.

 

[Jack Ryan]

never mind, why isn't there a delete on these edits?

 

[slacker]

The first of my parts came in today.

VQ Target hammer and sear: OMG, never used one of these before, i feel like breathing on trigger could set it off

I think one of my stocks came in, but ups left it at the front office which is closed for the night

 

[bwframe]

VQ Target hammer and sear: OMG, never used one of these before, i feel like breathing on trigger could set it off
(

Sounds really nice. Did you bump/drop test it to make sure it's still safe?

 

[slacker]

I have tried banging around the action / various parts of the stock and it seems fine so far. I have not loaded any ammo yet, but have a range trip planned for the weekend

 

[Simon6101]

I really need to get pics

I really need to get pics and post them. I have 12 different setups of 10/22. I just got a 96/22 that I had been looking for for over a year.

 

[Simon6101]

Pictures

Here are a few of my 10/22's

 

[slacker]

my new toy
ruger 10/22
VQ Target hammer and barrel
VQ auto-bolt release
extended mag release
yellow jacket bolt buffer
E.R. Shaw 16" fluted bull (.920) barrel
Tundra stock in electric blue
Walther PS22 red-dot


I have a Boyd's evolution stock ordered as well, i figure I will try both and sell the one I don't like.

 

[40calPUNISHER]

Is that some kinda candy blue?

 

[TJericho]

Sounds to me like you are a perfect candidate for one of these
Cabela's -- Gatling Gun Kit

That's pretty ridiculously awesome. I'm impressed ... guess that of course this type of thing would be legal, but I never really thought about it before.

May have to do some research.

 

[Simon6101]

nope

Metalflake blue and my wife has a charger in metalflake purple

 

[slacker]

I think I am keeping both stocks

 

[ATM]

Just got and installed VQ match hammer and auto bolt release, bolt buffer and hex take down screw. Also got 6 factory mags and a Butler Creek steel lips 25 rounder. Started cheap but the madness has begun...

 

[JByer323]

The more of these threads I see, the more I want a 10/.22. You guys need to stop posting pictures for awhile.

 

[Clay]

Hey Slacker - that 10-22 on top, is that stock made for a stock tapered barrel? Or is it made for a .920 bull barrel?

 

[clickclickboom]

The more of these threads I see, the more I want a 10/.22. You guys need to stop posting pictures for awhile.

I shoot mine and my MKIII more than anything.

mostly because that is really all I can afford. Not to mention both will shoot better than I am capable of, so I might as well increase my skill with cheap ammo.

Just bite the bullet, they only cost about 10-15 boxes of 9mm. That's what, 1-2 range trips ?

 

[gunbunnies]

Well, everybody has to have a illness, might as well be a Ruger 1022....

I got sick a couple years ago....

 

[slacker]

The top stock is actually designed for a .920 bull barrel. I ordered both stocks to see which one I like better, so I figured I might as well put receivers in both and see how they look.

I think the stock barrel looks pretty good in the wider channel. makes it sit a little lower and looks pretty sleek. I wonder if it effects accuracy having it completely "free floating"

 

[curraheeguns]

I ordered a Nodak Spud NDS-22R so I am about to build a non-10/22 10/22.....or non-ruger ruger or or or....whatever.

As long as the Tactical Solutions Cascade Monocore Ti fits on it nice and
snug!!

 

[repair]

I alredy posted this picture but it should go in here also.