So.. what are you reloading at the moment??

[BeDome]

It is perfect "reloading in the garage" weather. Not doing any powder or primer handling, since I just took advantage of the Brassman closeout on .223. I bought 3K .223 range brass last week. I've been cleaning them for three days. But, today is a resizing day, even though the tumbler is still singing.

 

[straight-shooter]

Finished annealing 300 blackout, 223, 308 and 45/70. I just have some 30-06 left to anneal then do some case sizing.

 

[JStang314]

Getting the garage warmed up so I can load a couple hundred .40 s&w with XTPs. Kind of back up HD or SHTF rounds.

 

[2in1evtime]

900 40 s&w today on the 550, 400 165gr and 500 180 gr. gonna do another 500, then go to 10mm

 

[sugarcreekbrass]

Finally got time to finish up my 223 loads. Wolf 55 gr FMJ over 26.5 gr of CFE 223. I'm now making up arrows for 3D season getting ready to start. Then I have more 9mm, 45, 223, and 300 BO. Never enough time to do all the fun stuff I want to do!

 

[sugarcreekbrass]

Got started on more 45s. Did 300 rounds after dinner. Have another 200 to go. Then hoping to get back on 9mm.

 

[rmw250]

Finishing up on my 9mm target loads with titegroup and Hornady HAP bullets. Hopefully setting up my new 300 blackout dies this weekend

 

[VinceU1]

Reloading for the family, so 2000 .45ACP, 3000 9mm, 2000 .308, 500 .357 and 500 .38Spl. It's going to be awhile before this job is complete.
Thank God for the 550.
And after the eye surgery, I hope to return to USPSA so 2000 9mm Major.

 

[cmann250]

Done with 45acp, on to 38 Special.

I need to chrono a few different loads. I have HP-38, TiteGroup, and CFE Pistol with 158gr and 125gr pills.


Sent from my iPhone using Tapatalk

 

[2in1evtime]

357 mag this is done on a lee turret press in my office

 

[d.kaufman]

Working up some 5 round batches of different weight bullets, powders, and powder charges for my 6.5 creedmoor. Hoping to hit the range in the morning and try them out.
As far as bullet weights I'm trying out 90gr, 100gr, 123gr, 140gr, and 143gr. 4, five round batches of each. 2 different powders and 2 middle of the road charges for each bullet weight and powder combo
Using Federal Gold medal match primers for all loads.

Should give me a good starting point on what weight bullet this rifle is going to like.

Was just gonna run 123gr and higher but since I have the lighter bullets for loading 6.5grendel as well, I figured I'd try them out too

 

[EGParatrooper]

45 for me today.

 

[Leadeye]

Back to 44-40, I shoot a lot of that.

 

[cjcycles]

Getting ready to do some loading.

Sent from my iPhone using Tapatalk

 

[cmann250]

I cleaned up my bench, lubed the press, and converted it to 38 Special.

3.8gr of TiteGroup pushing a 158gr Blue Bullet. Seems like TiteGroup is my workhorse powder...


Sent from my iPhone using Tapatalk

 

[Rookie]

Prepping 2,000 rounds of 223 brass...

 

[Gaterboy]

.357 mag on a RCBS Jr that is 45 years old and still going strong. Loading for a 1873 Winchester “One in Two Hundred”

 

[Leadeye]

458 Winchester.

 

[wingrider1800]

458 Winchester.

Getting ready to go shoot prairie dogs?

 

[cmann250]

10mm, 180gr and Blue Dot


Sent from my iPhone using Tapatalk