Plastic Gun Show-N-Tell

[DadSmith]

Walther PDP 4.5", the latest love in my life.

Who knew a poly-wonder 9 could be so accurate?

View attachment 273652

10 shots, 15 yards off hand.

Specs:

• Walther PDP 4.5" (Gen 2 Slide)
• Walther Performance Dynamic Trigger
• Springco Reduced Power Trigger Return Spring
• Trigger Pull set to 2 Lbs 10 oz exactly
• Ameriglo 3.5 moa Red Dot

This is on my to get list somewhere in line.
I've got three bolt action rifles, a lever action rifle, and two revolvers ahead of it.
However, if I find one in sale as low as the CZ P10 series are lately it will pop to the front real fast.

 

[tcecil88]

Updated pic of my 43X. I changed out the trigger for an OC Customs flat faced with pre and over travel adjustments w/ a Ghost Edge 3.5 lb. connector, polished all the internals up, installed a Vickers Tactical extended slide release, put a Traction Grips rubber grip under the Hogue grip for some extra traction, installed a Pearce grip plug to help keep crap out internals, installed a Streamlight TLR6 100 lumen WML and Meprolight Hyper Bright night sights with the orange ring around the front tritium vial. I have started replacing older night sights with ones that have the orange ring around it so I can see the front sight better.
I have put about 150 rounds of various ball and HP ammo through it with no malfs and I will probably start carrying it. I could have gotten the MOS version and put a micro red dot and a Streamlight TLR 8 on it, but I find for my purposes, the orange ring on the front sight works just as well. I also don't need 500 lumens that the TLR8 has for a close range defensive pistol like this. I like how light weight and thin it is this is the way it is set up. That's not to say I won't upgrade to the MOS at a later date and pass this one on to my kids, but for now this setup works great.

 

[cjacobs]

Scored a G30S. First four mags at 20 yards

 

[Max Volume]

TX 22 competition SCR with Holosun 407K green dot. Quickly becoming a favorite range toy.

 

[xXWHiSTLERXx]

My EDC. Started as a plain P365, it is now a P365XL. Only thing original is the fcu frame and controls.

WC XL grip module with the weights.
Swapped out for an XL slide.
MCARBO titanium striker, spring kit, flat SRT.
Molon labe backplate.
EPS Carry in 2moa in green.
Polished the feed ramp and sear.

Once I find an FCU for a decent price, I have enough parts now to make another P365

 

[jwamplerusa]

@xXWHiSTLERXx

What is your opinion of the EPS Carry? Do you think the glass has too much distortion at the edges?

 

[xXWHiSTLERXx]

@xXWHiSTLERXx

What is your opinion of the EPS Carry? Do you think the glass has too much distortion at the edges?

I don't feel it does, but I shoot with both eyes open. I could see how someone who is a one eyed shooter might be bothered by it. I have so much going on in my field of view, I don't even notice.

 

[morve80]

This is my edc. My full size m&p 9 2.0 optics ready with thumb safety. First thing added was a holosun 508t-gr. Second thing done was an Apex flat trigger kit install. I like the full size frame, my bear paws fit on it. I love this thing and it fits like a glove. As always, gotta get more mags. Lol.

 

[morve80]

I've just finished my most recent 80% build. I use a gst-9 frame with the full size grip. Has an enhanced lpk with aluminum trigger. And this time I went with a psa dagger complete slide in sniper green. I wasn't sure about the green slide. But it had this copper barrel that I really wanted and it was on sale. So I had to grab it. It is rmr cut. Hoping to get a holosun 509t to throw on my m&p above this and put my 508t on this one. The gst9 frame has a different grip angle than standard glock frames. And it's more rounded than blocky. So I love it. Almost feels like an m&p frame, but with the modularity and accessories of a glock.

 

[Max Volume]

Summer/beach carry. M&P 9 Shield IWB.

 

[tcecil88]

Glock 43X now with Holosun 507K

 

[morve80]

Glock 43X now with Holosun 507K
View attachment 297885

Looks great. Almost how I'd want mine, if I had one.

 

[tcecil88]

Looks great. Almost how I'd want mine, if I had one.

Thanks a bunch.

 

[DadSmith]

Glock 43X now with Holosun 507K
View attachment 297885

What is your thread protector?

 

[tcecil88]

What is your thread protector?

That is a Griffon Armament Micro Comp.
https://www.griffinarmament.com/micro-carry-comp-1-2x28/
I got mine from AIM Surplus for about the same price.

 

[tcecil88]

New to me early Gen 5 Glock 19

This pistol has not been shot much at all and looks brand new inside and out.

 

[zbloxzoid]

My Shadow Systems MR920, purchased from a fellow INGO’er. Topped with a Holosun 507k I purchased separately.

I’m not a huge fan of Glocks, the grip isn’t for me, but with the SIG (neutral) backstrap on it feels 10x better for me. Didn’t think it would be that comfortable, I was looking for a Glock or a Glock clone because it’s a design that works, even if I’m not the #1 fan of it. I’m 20 so I’m limited to private sales for handguns and this was up for grabs.

Still like my P320 better. The MR920 trigger is not even comparable to the P320’s, and I like the grip on the SIG better.

tl;dr shadow systems made a glock better than glock, and now i point it at my balls all day (appendix carry)

If anyone has a threaded barrel for a MR920/Glock 19 shoot me a message, I’d rather buy from an INGO member before new.

 

[el_barto3]

I'm sure there is one somewhere but i couldn't find one, so lets get one started

Might be Tupperware but it ain't plastic 150+rnds and counting

 

[tcecil88]

Finished up my Glock 43 for warm weather carry next year.

 

[tcecil88]

Upgraded (IMHO) to the Holosun 507C with the circle dot reticle from a Trijicon RM07. This is a hunting pistol so I like the 2MOA dot with the circle and bigger window over the 6MOA dot and much smaller window of the RM07. The RM07 will go to my G17 nightstand pistol, where I think it will do fine. The 507C also fit very well into the Forward Controls MOS adapter plate.