WTB: G2 CONTENDER FOREARM

[diver dan]

I am looking for a forend for a G2 contender frame , screw studs are 3 1/4 inches apart. Dont need anything fancy as this is for a hunting gun. Wood , rubber it doesnt matter .

 

[patience0830]

I am looking for a forend for a G2 contender frame , screw studs are 3 1/4 inches apart. Dont need anything fancy as this is for a hunting gun. Wood , rubber it doesnt matter .

Making one isn't that hard. Drill it both ways b4 you rip it. Drill the length a little undersized and finish sanding it out with 80 grit around a deep well socket. Couple of cap screws and washers from the hardware store.

 

[diver dan]

Making one isn't that hard. Drill it both ways b4 you rip it. Drill the length a little undersized and finish sanding it out with 80 grit around a deep well socket. Couple of cap screws and washers from the hardware store.

You know now that you said that , That will be my back-up plan,thanks.

 

[diver dan]

You know now that you said that , That will be my back-up plan,thanks.

Do you know by any chance , what size screws are those ? In case I make my own and need longer screws.Thanks , no problem if you dont know , just thought you might know.

 

[patience0830]

Do you know by any chance , what size screws are those ? In case I make my own and need longer screws.Thanks , no problem if you dont know , just thought you might know.

Don't remember off the top of my head but the escutcheon could be along for the ride to the hardware.

 

[Hookeye]

EABCO has the G2 forend

TC Contender G2 Rubber Pistol Forend 12-14"

TC Contender G2 Rubber Forend Fits Thompson Center G2 12-14" pistol barrels. 207-7730,thompson center arms,thompson center,encore barrels,prohunter barrels, G2 rubber forend, contender forend, 207-7730, 12" barrel, 14" barrel, rubber tc forend

eabco.com

 

[gemihur]

Contender forearm screws = 10-32
I get mine at Ace Hardware and cut 'em to length needed
Good Luck, man!