Package has been SOLD, Thanks!!
I bought all this stuff over a year ago with big plans, and haven't ended up getting to it. I'd rather free up some cash at this point. ALL of these items are brand new, I only opened them for initial inspection and again today for pics.
1. 5D Tactical Router Jig PRO, universal AR15/AR9 lower jig. This jig has an attachment spout for a shop-vac, to help collect chips.
https://www.5dtactical.com/ar-15-80-lower-jig-p/5d-jig15.htm
2. 5D Tactical Router Jig PRO tool kit, with ReadyMill, set option A.
https://www.5dtactical.com/80-lower-jig-tool-kit-p/5d-pk300.htm
3. (2) extra Carbide 5/16" end mills, one 2-flute and one 4-flute, these can be used as replacements in the ReadyMill if it breaks or dulls. There are instructions online for swapping them.
4. Porter Cable PCE6435 handheld multi-speed Router. This was one of the top routers recommended by 5D and their customers when I purchased it, it has an LED to illuminate your work.
https://www.portercable.com/product...-variablespeed-14-in-laminate-trimmer/pce6435
https://www.grainger.com/product/PO...mer-30RV95?searchQuery=pce6435&searchBar=true
5. Irwin 226340 4" drill press vise. Perfect size low-profile vise to hold the jig down to your workbench. Some people have used C-clamps instead of permanently mounting the vise, with great results.
https://www.irwin.com/tools/vises/drill-press-vises
https://www.acmetools.com/shop/tools/irwin-226340
6. Nonbranded coolant mister. This is used with an air source (compressor or canned air) to deliver the cutting fluid of your choice to the cutting area, as a mist rather than as a flood. The nozzle is adjustable for pressure/flow.
7. Quantity 5 (five) Brownells branded 80% receivers. Forged 7075-T6 aluminum, these are the ones already black hardcoat anodized and they DO have SAFE and FIRE markings already engraved in both sides. The Takedown lug pocket is already machined out. These are of course sold out/discontinued, just like all of their 80% receivers. Just like almost any other source for 80% receivers as well.
https://www.brownells.com/rifle-par...u100025709-112633-209340.aspx?sku=100-025-709
I did a lot of research back when I got this stuff, making sure that everything was the best quality option and that everything would work well together. With purchase, shipping and tax, I'm into this setup well over $850.
I'm looking for $650 cash for the entire setup. I don't want to ship because of weight/bulk, I'm in the Carmel/Westfield area (North of 146th, E of 31/Keystone) and I can meet somewhere near here. I'm available most afternoons/evenings/nights. Some mornings also, depending on how late I stayed up the night before.
I'm not really looking for trades, though one thing I might consider would be a decent standard configuration or folding 7.62x39 AK package.
Communication through INGO messenger please.
Thanks INGO!
I bought all this stuff over a year ago with big plans, and haven't ended up getting to it. I'd rather free up some cash at this point. ALL of these items are brand new, I only opened them for initial inspection and again today for pics.
1. 5D Tactical Router Jig PRO, universal AR15/AR9 lower jig. This jig has an attachment spout for a shop-vac, to help collect chips.
https://www.5dtactical.com/ar-15-80-lower-jig-p/5d-jig15.htm
2. 5D Tactical Router Jig PRO tool kit, with ReadyMill, set option A.
https://www.5dtactical.com/80-lower-jig-tool-kit-p/5d-pk300.htm
3. (2) extra Carbide 5/16" end mills, one 2-flute and one 4-flute, these can be used as replacements in the ReadyMill if it breaks or dulls. There are instructions online for swapping them.
4. Porter Cable PCE6435 handheld multi-speed Router. This was one of the top routers recommended by 5D and their customers when I purchased it, it has an LED to illuminate your work.
https://www.portercable.com/product...-variablespeed-14-in-laminate-trimmer/pce6435
https://www.grainger.com/product/PO...mer-30RV95?searchQuery=pce6435&searchBar=true
5. Irwin 226340 4" drill press vise. Perfect size low-profile vise to hold the jig down to your workbench. Some people have used C-clamps instead of permanently mounting the vise, with great results.
https://www.irwin.com/tools/vises/drill-press-vises
https://www.acmetools.com/shop/tools/irwin-226340
6. Nonbranded coolant mister. This is used with an air source (compressor or canned air) to deliver the cutting fluid of your choice to the cutting area, as a mist rather than as a flood. The nozzle is adjustable for pressure/flow.
7. Quantity 5 (five) Brownells branded 80% receivers. Forged 7075-T6 aluminum, these are the ones already black hardcoat anodized and they DO have SAFE and FIRE markings already engraved in both sides. The Takedown lug pocket is already machined out. These are of course sold out/discontinued, just like all of their 80% receivers. Just like almost any other source for 80% receivers as well.
https://www.brownells.com/rifle-par...u100025709-112633-209340.aspx?sku=100-025-709
I did a lot of research back when I got this stuff, making sure that everything was the best quality option and that everything would work well together. With purchase, shipping and tax, I'm into this setup well over $850.
I'm looking for $650 cash for the entire setup. I don't want to ship because of weight/bulk, I'm in the Carmel/Westfield area (North of 146th, E of 31/Keystone) and I can meet somewhere near here. I'm available most afternoons/evenings/nights. Some mornings also, depending on how late I stayed up the night before.
I'm not really looking for trades, though one thing I might consider would be a decent standard configuration or folding 7.62x39 AK package.
Communication through INGO messenger please.
Thanks INGO!
Last edited:
