AR10 bolt ejector removal

[LEaSH]

Have any of you built your own tool that will safely depress the ejector so that the tension is off of the roll pin?

Does to the ejector pin need to be depressed further than the bolt face or is flush with the bolt face far enough?

Midway and Brownells are backordered on the fixtures, but any leads on a good tool would also be helpful.

Thanks.

 

[BR8818]

Have any of you built your own tool that will safely depress the ejector so that the tension is off of the roll pin?

Does to the ejector pin need to be depressed further than the bolt face or is flush with the bolt face far enough?

Midway and Brownells are backordered on the fixtures, but any leads on a good tool would also be helpful.

Thanks.

I just use a spent case.

 

[gmcttr]

Creedmoor Sports AR-10 Bolt Vise

Creedmoor AR Bolt Vise Designed by Creedmoor Innovative Precision Works (CIPW), our bolt vise helps you disassemble your AR-10 bolt without fuss. The screw assembly face fits perfectly into the bolt face to compress the ejector so you can remove the spring pin easily. A perfectly aligned hole...

www.creedmoorsports.com

 

[55fairlane]

I might have to have to machine up a couple of these

 

[LEaSH]

Creedmoor Sports AR-10 Bolt Vise

Creedmoor AR Bolt Vise Designed by Creedmoor Innovative Precision Works (CIPW), our bolt vise helps you disassemble your AR-10 bolt without fuss. The screw assembly face fits perfectly into the bolt face to compress the ejector so you can remove the spring pin easily. A perfectly aligned hole...

www.creedmoorsports.com

Much appreciated

 

[LEaSH]

I just use a spent case.

That worked like a champ!

C clamp with a socket protecting the other end and a cut down case on the bolt face end.

Went smoothly.

Still probably will buy a tool linked above. I seem to be doing these "econo-builds" a few times a year.

Headspace passed both bolts I was checking.

Thanks for the suggestions ingo'ers.

 

[Lpherr]

I might have to have to machine up a couple of these

Are you sure you have the skill set?

 

[55fairlane]

Are you sure you have the skill set?

Probably not.....lots of armchair expert's tell me I am a talentless bum

 

[Lpherr]

Probably not.....lots of armchair expert's tell me I am a talentless bum

Well...

If you decide to made any, be sure to post pics. I would like to see your process.
It looks like it would be pretty simple, but things aren't always as they seem.

 

[55fairlane]

Well...

If you decide to made any, be sure to post pics. I would like to see your process.
It looks like it would be pretty simple, but things aren't always as they seem.

If 5 or 6 people wanted them, I might up a small production run of them

 

[LEaSH]

If 5 or 6 people wanted them, I might up a small production run of them

I'll hold off on ordering one if you think you might do it.

I'll prepay if it will help you decide. Much rather have an ingo'er made product.

 

[55fairlane]

I'll hold off on ordering one if you think you might do it.

I'll prepay if it will help you decide. Much rather have an ingo'er made product.

Let me do some design work this week and see what it's gonna take

 

[VinceU1]

If you've got a 3D printer, Thingiverse has a vice for the AR10.