I have an old Herter's Mod 0-3 Super single stage press the holders are caliber specific and use set screws to hold in place. The one that's in it works for 30-06 and the priming arm works for it. I'd really like to find the shell holders for 44mag/45 colt, 38 special, 30/30, 45/70. I have an adapter to modern holders but the primer arm comes up to short. Any advice would be appreciated. Thanks
-
Be sure to read this post! Beware of scammers. https://www.indianagunowners.com/threads/classifieds-new-online-payment-guidelines-rules-paypal-venmo-zelle-etc.511734/
Herter's shell holders
- Thread starter fender
- Start date
The #1 community for Gun Owners in Indiana
Member Benefits:
Fewer Ads! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
Have a couple used Herters shellholders #7,8,9 15 and 26
Also have the RCBS adapters new.
IMHO run the adapters and go w a hand prime.
Only time I run a press primer....is on a turret press where I can quickly swap to a Lee ram prime (leave one turret hole set up for that).
I do have some aluminum little C frame and the Lyman Acculine, either might be worth using as a stand alone priming station. Haven't built a new bench at new house, not gonna add a smaller press along side my Mag T. Hand prime or Ram prime for me (have a Sinclair hand prime- haven't tried it yet).
Run Lee collet die set in .243 and Lyman reg in .44 mag, so 5 of the turret holes for those, the leftover for the Ram prime.
Also have the RCBS adapters new.
IMHO run the adapters and go w a hand prime.
Only time I run a press primer....is on a turret press where I can quickly swap to a Lee ram prime (leave one turret hole set up for that).
I do have some aluminum little C frame and the Lyman Acculine, either might be worth using as a stand alone priming station. Haven't built a new bench at new house, not gonna add a smaller press along side my Mag T. Hand prime or Ram prime for me (have a Sinclair hand prime- haven't tried it yet).
Run Lee collet die set in .243 and Lyman reg in .44 mag, so 5 of the turret holes for those, the leftover for the Ram prime.
Last edited:
