I am looking to sell or trade three ARs that I'm not currently using.
The first is a PSA PA10 in .308. I assembled the lower with Magpul and PA10 parts and an EPT trigger. The upper was PSA assembled, except I swapped in a Magpul handguard and added a MBUS sight. I also upgraded the bcg to a NiB one. The upper is unused, and the lower has been through a few boxes of ammo. Update 2/20: ran one magazine through this gun to make sure it functioned and locked back at the end of the magazine. One PMAG also included. Price is $900.
The second is a PSA FDE magpul AR15 build kit assembled with an Anderson lower reciever. It has a 16" nitrided barrel chambered in 5.56 with a 1/7 twist. It has an EPT trigger and a NiB bcg. One 30 round PMAG and one small steel magazine included. The rifle has about 500 rounds through it with no issues. Price is $600. This rifle has sold.
The third is an AR15 chambered in 7.62x39. The barrel is 16" with a 1/10 twist and I'm pretty sure it also came from PSA. It has a NiB bcg. The lower is an Anderson with an EPT trigger. The scope is a Nikon 4-12x with a BDC reticle. I put this rifle together about 5 years ago, but never shot it. Update 2/20: ran about 20 rounds to function check both magazines and rifle. I realized that the keymod handguard didnt look that nice, so I swapped it with a PSA mlok one. Two 7.62x39 AR magazines included. Price is $600. This rifle has sold.
I have a spare Gen 1 Strike Eagle 1-6x in a Vortex cantilever mount that I can add for $250. I also have a spare Swampfox Arrowhead 1-10x in a Swampfox cantilever mount that I can add for $350. I can laser boresight the rifle to get you on paper if you want an optic.
I'm located on the west side near Avon, but can travel around Indy to meet. I'll need to see a DL and prefer to see a carry license, but nothing will be recorded. I have a decent amount of spare parts, so if you like one of the rifles, but want a different grip, stock, etc., just PM me and we can probably work something out. Please PM me for any questions or additional pictures. I prefer selling over trades, but feel free to make trade offers.
The first is a PSA PA10 in .308. I assembled the lower with Magpul and PA10 parts and an EPT trigger. The upper was PSA assembled, except I swapped in a Magpul handguard and added a MBUS sight. I also upgraded the bcg to a NiB one. The upper is unused, and the lower has been through a few boxes of ammo. Update 2/20: ran one magazine through this gun to make sure it functioned and locked back at the end of the magazine. One PMAG also included. Price is $900.
The second is a PSA FDE magpul AR15 build kit assembled with an Anderson lower reciever. It has a 16" nitrided barrel chambered in 5.56 with a 1/7 twist. It has an EPT trigger and a NiB bcg. One 30 round PMAG and one small steel magazine included. The rifle has about 500 rounds through it with no issues. Price is $600. This rifle has sold.
The third is an AR15 chambered in 7.62x39. The barrel is 16" with a 1/10 twist and I'm pretty sure it also came from PSA. It has a NiB bcg. The lower is an Anderson with an EPT trigger. The scope is a Nikon 4-12x with a BDC reticle. I put this rifle together about 5 years ago, but never shot it. Update 2/20: ran about 20 rounds to function check both magazines and rifle. I realized that the keymod handguard didnt look that nice, so I swapped it with a PSA mlok one. Two 7.62x39 AR magazines included. Price is $600. This rifle has sold.
I have a spare Gen 1 Strike Eagle 1-6x in a Vortex cantilever mount that I can add for $250. I also have a spare Swampfox Arrowhead 1-10x in a Swampfox cantilever mount that I can add for $350. I can laser boresight the rifle to get you on paper if you want an optic.
I'm located on the west side near Avon, but can travel around Indy to meet. I'll need to see a DL and prefer to see a carry license, but nothing will be recorded. I have a decent amount of spare parts, so if you like one of the rifles, but want a different grip, stock, etc., just PM me and we can probably work something out. Please PM me for any questions or additional pictures. I prefer selling over trades, but feel free to make trade offers.
Attachments
Last edited:
