Have WAY more of these than I need.
Individually boxed, not bulk packed.
$118 per thousand, not interested in selling lesser quantities.
4000 will fit in Medium Flat Rate box ($15.50 for Flat Rate shipping, $7.20 to insure for full amount) = $22.70 for shipping 4000.
Pickup/meetup is...
All are Pacific Tool and Gauge, all are interchangeable pilots and will include the "nominal" pilot for their bore diameter.
All are in excellent condition, none have been previously sharpened or otherwise modified.
These ARE NOT pull through reamers.
Shipment - USPS Priority Mail small flat...
Used on a subsonic 510 Beowulf based cartridge, and later on a 50 Peacekeeper/500 A-Square.
No gas erosion.
Finish is about what you would expect, wasn't great when it was brand new, looks rusty in spots - but you can't rub anything that looks anything but parkerizing off of it.
$150 shipped...
Many moons ago, I called Pacific Tool and Gauge for some random order. I was offered as many of these gas blocks as I wanted, they claimed they were over-runs for some "major manufacturer". Who knows, but I took 10 of them.
Haven't used any of them, so here they are.
They do not have set...
Upper receiver includes forward assist and dust cover assemblies. Used. Marked M&S Custom on top rail. Finish isn't that great, but it works and could be easily touched up with a Sharpie or coated with your product of choice.
AP Custom 15" USED carbon fiber float tube with full length top...
Likely won't be travelling for any of this, unless you take it all - pickup in Clinton area.
.358 Rifle Bullets - 264 of them, counted by someone with an Indiana public school education - so take that in to account.
Barnes 180 TTSX FB - 18 count
Nosler Partition 225 - 36 count
Hornady 200 FTX...
What you see is what you get.
Hornady dies.
Underwood Ammo, 300g hollow points.
66 pieces of brass, some from the original run from Starline that are marked 50AE.
Several Remington 405g SP that have been pulled.
$100.
For additional expense, can set you up with some Lil Gun or RL-7.
Bought new, originally a duplex reticle with standard knobs. Sent to Leupold Custom shop, had M1 knobs installed and the TMR reticle.
30mm, side focus.
It is in nice shape. No bare aluminum anywhere, just a slight discoloration/shadow in the right light of where the two ring halves came...
I've discovered that I'm not an exposed aluminum chassis rifle sort of guy. Don't really care for the feel of it.
Picked this up new in June of 2019, have fired it a total of 35 times. Never worked up a load for it, as it shot the ten rounds each of FGMM, PRVI match and my stand by load of...
I've got roughly 600 pieces of 80g .224 Hornady AMAX bullets, six bags - four of which are unopened/unmolested. Two have been opened and patched with packing tape.
Weighed all six bags and have a variance of .3 ounces between them, so I'm calling it +/- 600 pieces. Oddly enough the unopened...
Package deal, not interested in breaking it up.
Box of 20, Underwood 300 grain jacketed hollow point factory loads. Generally see these advertised around $35.
Hornady 458 SOCOM dies, like new - with an extra seating die. Generally see these new around $55, I slightly prefer the Redding - but...
Location of fixture on Forster's website:
https://www.forsterproducts.com/product-category/gunsmithing/sight-mounting/
Used, in great shape. I've used it for mounting sights, but more than anything - I've used it as a fixture for drilling gas ports, sleeving oversized gas ports and...
This is an all or nothing deal, it isn't worth the hassle of breaking it up, and I've priced the package accordingly. You can break it up and peddle it off, I'm not interested in doing that.
What you see is what you get.
Some pan lubing materials, some already made up, and instructions on how...
Bought this several years back and haven't touched it since. Spring cleaning in the barn - and have decided it is time for this to move on.
The lead pot is approximately 8"x11", four large ingot molds, the burner and regulator, two different ladles and a skimmer. Always figured looking at it...
At one point I was doing a fair amount of T/C barrel recrowns, most wouldn't fit in my lathe - so I purchased this tool. Absolutely pristine condition, some of the pilots have never been used.
Haven't touched it in a couple of years, so it is time for a new home.
Includes the following...
This has been my "house" coyote upper for the last couple of years, has done well in that role - but wanting something a bit lighter.
Boring accuracy with 60g V-MAX/Nosler BT and Varget. 230 rounds fired.
18" HBAR contour heavy 1/8 twist Wilson air gauged, cryo treated barrel. This is not a...
New Years Resolution - move unfinished projects on.
Remington 700 long action, bolt raceway bored to .705 with PTG Gre-Tan tooling, then trued using PTG Gen II (standard tenon diameter). PTG Magnum one piece bolt .7025" diameter, fluted, with M16 extractor. PTG recoil lug pinned using...
As these things typically go, I put the word out a few years ago that I was looking for a new engraving machine - and ended up with a couple of them.
This is a motorized New Hermes Pantograph, serial number 25152.
If these kind of things interest you, this came from a Chicago area Electro...