The "Sig"ness- vol 1.

[drillsgt]

So I thought I was dead set on a B&T GHM9 but the X-Five might change that, assuming a 2k price

That B&T has been on my radar as well.

 

[Dean C.]

That B&T has been on my radar as well.

I got to shoot a buddies GHM-9 with the ELF Trigger (you want this IMHO) it had the very nice folding brace that magnetically attaches to the side of the gun. Very easy to shoot and my target at 15 yards was a ragged hole, never really seen a use for PCC's untill I shot that. Now I am sold on B&T guns and am debating just getting the APC9

 

[Expat]

Watching SWAT (TV Show). Looked like some MPXes and a couple rattlers being used?
any one else watch it?

 

[chadm]

Watching SWAT (TV Show). Looked like some MPXes and a couple rattlers being used?
any one else watch it?

I really enjoy that show. HK416 and Sigs, and some Staccatos thrown in.

 

[Noble Sniper]

LIMITED EDITION P320MAX XFIVE SLIDE ASSEMBLY

Only 300 made - Limited to 3 per customer

www.sigsauer.com

I’m struggling as I would like nothing more than to replace the slide on my AXG PRO…….

 

[shootersix]

LIMITED EDITION P320MAX XFIVE SLIDE ASSEMBLY

Only 300 made - Limited to 3 per customer

www.sigsauer.com

I’m struggling as I would like nothing more than to replace the slide on my AXG PRO…….

Should fit, but might leave a gap in the frame, the axg is a carry model size (full size frame with a compact slide) so part of your recoil spring and guide rod might be exposed, besides it’s a thousand bucks!!!!

That’s a lot of clams!

 

[ditcherman]

Should fit, but might leave a gap in the frame, the axg is a carry model size (full size frame with a compact slide) so part of your recoil spring and guide rod might be exposed, besides it’s a thousand bucks!!!!

That’s a lot of clams!

Not sure the physical size of the carry, but my 4.6ish barreled AXG’s would look fine with my 5” legion slide and barrel.
My AXG frames are the same size as my OEM Xfive and scorpion, the only larger frame is the legion, matches the slide profile (long) like the scorpion does (short), but nothing exposed or out of place no matter how you mix and match.

 

[shootersix]

Not sure the physical size of the carry, but my 4.6ish barreled AXG’s would look fine with my 5” legion slide and barrel.
My AXG frames are the same size as my OEM Xfive and scorpion, the only larger frame is the legion, matches the slide profile (long) like the scorpion does (short), but nothing exposed or out of place no matter how you mix and match.

Ok gotcha! I’m here at work, and was going to slap my legion slide on my axg when I got home just to see what it looked like!

I am thinking about another legion slide, one I can keep my delta point pro on, and another with iron sights, that way I can use either setup in idpa (one slide for carry optics and the other for esp)

 

[Noble Sniper]

Yes it will fit without any gaps etc….. I already have the P320 MAX so I figured this might be an interesting addition!!

 

[88E30M50]

Occasionally, Sig will dump slide assemblies for decent money. I picked up a Romeo1 Pro 9mm P229 slide (minus barrel) for $499 last year as well as a complete .357 Sig P229 slide assembly for $350 IIRC the year before.

I’ve been moving slides around among my P229s enough to have started to lose track of which slides came with which guns. I can go back to purchase photos if I really need to match things up, but not an issue right now.

 

[88E30M50]

If anyone is interested, OsageCountyGuns has a 9” MCX upper on sale for $1399 in 300BO. This comes with parts needed to convert any AR lower it looks like. With the MCX’s running north of 2 grand, this might not be a bad option for getting into one.

https://osagecountyguns.com/sig-sauer-mcx-conversion-kit-w-2-stage-trigger-9-300-blk.html

 

[shootersix]

Occasionally, Sig will dump slide assemblies for decent money. I picked up a Romeo1 Pro 9mm P229 slide (minus barrel) for $499 last year as well as a complete .357 Sig P229 slide assembly for $350 IIRC the year before.

I’ve been moving slides around among my P229s enough to have started to lose track of which slides came with which guns. I can go back to purchase photos if I really need to match things up, but not an issue right now.

Sig has a sale on slides right now! Starting at 229, for a p320 compact (100 bucks off!)

Most (but not all) are 50-100 bucks off, it’s the assembled slide minus the barrel and guide rod and return spring (a lot of them have night sights!)

 

[Dean C.]

I WANT a X-Five but when you already have a huge 20+1 SAO target pistol at home , still might get one if they ever get down to $1800-

 

[Skip]

I wanna play! I love the Sig P320 platform. Even swapped out my Glocks as CCW.

 

[ditcherman]

Alright kids if you wanna play around, just in case you're not aware of this part of Sig's site, here is the custom fcu builder.

p320

Scroll around on the right side, picking things out in order and it will tell you what fits and what doesn't.
I can tell you that a titanium AXG grip module with black grip panels and a stainless slide does not look at all like the new X-five.
But you can see a lot of different slides there, with prices.

 

[deo62]

Was just trying to navigate that. Think I’m going the AXG frame with the Raze? Slide. That or the Spectre, not sure which yet.

 

[deo62]

Found that I’m really enjoying the AXG frame more and more. When I added that comp to it, it became my favorite.

 

[ditcherman]

Was just trying to navigate that. Think I’m going the AXG frame with the Raze? Slide. That or the Spectre, not sure which yet.

I can't remember if you have an AXG or not? If not you will love it, feels a lot like a well loved P226 we know of. I put lok palmswell grips on and really like the curve they make, but they might be too much for many people. Very large, very aggressive. Just the factory curve of the AXG is nice.

ETA ah you answered my question while I was still being windy.

 

[ditcherman]

LIMITED EDITION P320MAX XFIVE SLIDE ASSEMBLY

Only 300 made - Limited to 3 per customer

www.sigsauer.com

I’m struggling as I would like nothing more than to replace the slide on my AXG PRO…….

The OEM probably wouldn't be hard to sell hint hint.

 

[deo62]

The Equinox is the one I’ve been shooting a lot of lately