So.. what are you reloading at the moment??

[Dbeasley2771]

Just started reloading in general...I'm starting with .223 and 9mm

 

[mac45]

.357 Mag
New rifle doesn't seem to like 2400. Time to try another powder.

 

[jgressley2003]

.223 using Benchmark and Sierra Blitzking 55 grain

 

[oldpink]

.30-06 Springfield
Federal case
CCI #200 primer
57 grains IMR4831 powder
165 grain Barnes TTSX bullet

ProChrono Digital shows muzzle velocity for this out of my Ruger M77 as averaging 2780 fps, and five of these projectiles plop inside right at one inch at 100 yards.
These will be riding in the magazine of the Ruger come Friday morning.

 

[Broom_jm]

Most recently, 308 for my son's Savage, 243 for dad's M700, 357 MAX for my buddy's Encore, and 35 Indy for my own break-action rifle.

 

[Ben Nelson]

Ah, the falling leaves and crisp morning temperatures . . . It's definitely reloading season. I'm loading Hornady 9mm, 124-grain XTPs with Hodgdon CFE Pistol.

 

[RMC]

22-250 50 gr Hornady V-Max, 380 90 gr Sierra V-Crown, 9mm 124 gr Hornady XTP, and 45 acp 230 gr Hornady XTP

 

[1775usmarine]

Since my stuff is in the garage I've switched to 38Spl. I've had no issues with loading down to 30 degrees. I'm using 158gr FP extremes over 3.6gr of titegroup loaded to 1.425in.

 

[Leadeye]

50-95 and 32-40 for rifles, 38-40 and 45 Colt for both.

 

[squirrelhntr]

9mm on the bench at the moment. shifting back to hobbie mode after yesterdays results. hallelujah, no more HRC. lol

 

[foxmustang]

.300 win mag brass processing on the single stage. Someone decided to go blow 100 rounds of it just before the election...
45 ACP on the progrerssive. I was getting my stockpile replenished

 

[JStang314]

.223 on the Rockchucker and .40 S&W on the turret.

 

[1911ly]

.300 win mag brass processing on the single stage. Someone decided to go blow 100 rounds of it just before the election...
45 ACP on the progrerssive. I was getting my stockpile replenished

Nothing wrong with a single stage press! I haven't gone to the dark side and gotten a progressive. I load pretty much everything for match grade. I have thought about it for pistol rounds like you are doing. Maybe someday.

-----------------------------------------------------

Tonight I loaded some of the 308 brass I prepped the other day. One box done and I am just about 2/3 the way threw the last box of 20. They will be loaded with AA2460 :




Next will be some more 44mag loads, then some 300wm, then 30-06. I have enough to keep me busy for a bit. And J has been asking when we are going to do some 38spl's, We will do that next week.

I am having a good time. So is my son. He likes prepping brass and seating primers. He even likes seating and crimping. He hates doing powder.

Keep having fun everyone!

 

[1911ly]

More of the same as last night. Just a different powder, fun fun fun!!




Next on the list, more 44mags with Hornady 225ftx's.

 

[patience0830]

Latest was .20 VarTarg. Tonight I need to do 6.5 Creedmoor so I can shoot the new stealth tomorrow.

 

[Thegeek]

.300blk. Did the first 10 rounds last night. 220gr Lapua Secnar-L (4HL/PL7062), 11gr of H4198.

This is my first time loading the .300. So, it took a while to get the dies setup. It's really nice having the Hornady Lock 'n' Load quick change setup. My only complaint with this load is that my RCBS Uniflow doesn't like this powder and it's hard to cycle it.

 

[pdg45acp]

I've got 40 S&W set up on the RL550, .223 Set up on the old single stage RCBS Rock Chucker, and 12GA set up on the MEC Grabber. And there they sit, waiting for me to get off the computer.

 

[oldpink]

This is what I loaded most recently, specifically for deer hunting.
The fired case outside of the ammo box in the front is the one I used to take a five point buck this morning at 9:50.

 

[1911ly]

This is what I loaded most recently, specifically for deer hunting.
The fired case outside of the ammo box in the front is the one I used to take a five point buck this morning at 9:50.

Freaken awesome!! Congrats on taking the buck!

 

[Nazgul]

Was behind the curve on loading the 308 for deer season. Had lots of FMJ on hand for the M1, M1A and Ruger scout.

Loaded some 150 Grain round nose had for my 30/30. Matched the 30/30 velocity.

Killed a decent doe this morning.

Don