List of Engravers (NFA/SBR)

The #1 community for Gun Owners in Indiana

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Stainer

    Master
    Rating - 97.1%
    33   1   0
    Feb 8, 2009
    1,908
    38
    God's Country
    So you are building something awesome (SBR, Suppressor, DD, or AOW) and you need it engraved, well this is a list of engravers in Indiana or out of state that you can send your work to. I will update the Original Post as new professionals are added to the thread whether by the engraver themselves or at the recommendation of an INGO member. If you are going to add them to the list, please either have their business name or INGO name as well as a good way to contact them. My hopes are that the Mods will stick this to help everyone out in the future. I encourage you to post up work performed by any of these companies so that others can see their work.

    INGOers
    Sp3worker - Located in Northeast Indiana. He is an FFL/SOT. PM's work well or (260) 517-9382

    purple72 - Located 30 miles east of Indy. PM's work well or (765) 445-9243

    ZR Tactical Solutions, LLC - Noblesville. PM's directed to menzzer37 are the best method for now.


    In State
    Laser Scribe - 5245 Commerce Circle, Indianapolis, IN. 46237. (317) 859-1397 LaserScribe: The Laser Engraving Specialists

    Scotty's Dynamic Designs - 3101 E Michigan Blvd, #A. Michigan City, IN. 46360. (219) 809-7268

    Champion Awards & Trophies - 1020 South Tillotson Avenue, Muncie, IN. 47304. (877) 403-4842


    Out of State
    Ident Marking Services - Rockwall, TX. 469.464.5500 Firearms Marking

    Orion arms - Lino Lakes, MN. Welcome*-*orion-arms.com: custom firearm engraving

    Armor-Hyde Technologies - Louisville, KY. Armor-Hyde Technologies - About Us

    Harford Engraving Service - Bel Air, MD. Harford Engraving - Firearm Parts
     
    Last edited by a moderator:

    Stainer

    Master
    Rating - 97.1%
    33   1   0
    Feb 8, 2009
    1,908
    38
    God's Country
    Here is a pic of Sp3Worker's work. He did a great job and even went a little deeper at my request because I was going to duracoat the gun. I PM'd him, gave him a call after a quick PM back, the call hashed out the details, sent it to him with a check and instructions, got it back within the week. No complaints whatsoever.
    picture.php
     
    Last edited:

    stoyan79

    Sharpshooter
    Rating - 100%
    22   0   0
    Oct 24, 2009
    389
    34
    Scott has done few guns for me, excellent work, does them when you are there and charges something like $15 which is CHEAP.

    Scotty's Dynamic Designs

    (219) 809-7268
    3101 E Michigan Blvd, #A
    Michigan City, IN 46360
     

    revsaxon

    Master
    Rating - 100%
    2   0   0
    Feb 21, 2010
    1,954
    38
    Plano, TX
    Here is a pic of Sp3Worker's work. He did a great job and even went a liuttle deeper at my request because I was going to duracoat the gun.
    picture.php

    A big +1 for SPWorker. He has done some great work for me over the years, and has a scary attention to detail.
     

    CountryBoy19

    Grandmaster
    Rating - 91.7%
    11   1   0
    Nov 10, 2008
    8,412
    63
    Bedford, IN
    I can personally attest to the great job performed by both SP3worker on my F1 suppressor, and by Laserscribe on my SBR AR lower.

    The only reason I had Laserscribe do my lower was because at the time SP3worker did not have the ability to engrave under the trigger guard. He now has that ability and will be getting ALL future engraving work from me.

    It's convenient that he does the engraving a few miles from my parents house. Easy to do when I go home to visit. :rockwoot:
     

    Stainer

    Master
    Rating - 97.1%
    33   1   0
    Feb 8, 2009
    1,908
    38
    God's Country
    Updated with some more numbers. If anyone else has any they would like me to add, either put it in the thread or send me a PM. Also don't be afraid to post pics of their work.
     

    tradertator

    Grandmaster
    Rating - 100%
    128   0   0
    Jul 1, 2008
    6,783
    63
    Greene County
    I can personally attest to the great job performed by both SP3worker on my F1 suppressor, and by Laserscribe on my SBR AR lower.

    The only reason I had Laserscribe do my lower was because at the time SP3worker did not have the ability to engrave under the trigger guard. He now has that ability and will be getting ALL future engraving work from me.

    It's convenient that he does the engraving a few miles from my parents house. Easy to do when I go home to visit. :rockwoot:

    I'm sold. This is who is getting my work from now on.
     

    ctbreitwieser

    Master
    Rating - 100%
    2   0   0
    Jun 14, 2011
    2,290
    38
    DuCo.
    This thread needs more pics. Hopefully if we can get some more pics on here of some of the engravers work the mods will sticky it. It would definitely be a big help to have this as a sticky and more pics would help people choose exactly what they want.
     

    Stainer

    Master
    Rating - 97.1%
    33   1   0
    Feb 8, 2009
    1,908
    38
    God's Country
    This thread needs more pics. Hopefully if we can get some more pics on here of some of the engravers work the mods will sticky it. It would definitely be a big help to have this as a sticky and more pics would help people choose exactly what they want.

    You are absolutely correct! I was just getting ready to post the latest work I had done.

    My experience with Laser Scribe was positive. The price was only $35 and the work is really nice. I like that the engraving is very fine, which is most likely the trait of the Laser vs Mechanical engraving. The only negative was that I dropped it off on Thursday and they said it would take about 2 weeks. on the friday of the two full weeks following, they still didn't have it done. However the following Monday it was done. They were really nice. I would use them again if I didn't mind a little bit of a wait.

    picture.php
     

    hotrodtba

    Expert
    Rating - 100%
    21   0   0
    Jun 4, 2008
    893
    18
    Ossian
    This thread needs more pics. Hopefully if we can get some more pics on here of some of the engravers work the mods will sticky it. It would definitely be a big help to have this as a sticky and more pics would help people choose exactly what they want.

    Here's my AR I did myself:

    AR15SBREngrave.jpg


    And one I did for someone else:

    IMAG0001.jpg
     
    Top Bottom