AK 47 Show and Tell

snorko

Grandmaster
Site Supporter
Rating - 100%
327   0   0
Apr 3, 2008
6,848
113
Evansville, IN
The Arsenal SM-13 mount seems to be available on several sites. I have one that I got with a rifle package nut have no plans for it. As far as I know it is NIP, no visible wear.
 

IUKalash429

Bullet Hose
Site Supporter
Rating - 100%
18   0   0
Apr 6, 2019
586
63
Rum Ham
finally dug a couple AK's out and been shooting them. this is probably my Favorite Arsenal 104UR SBR

Long time no see! My stamp came back and the barrel shroud is now long gone, thanks to @AllenM today. It's tough to beat a 5.45 SBR...

3GW45nih.jpeg
 
Last edited:
Rating - 100%
23   0   0
Mar 26, 2008
2,378
48
Deadman's Hollow
Do you own or have you shot with a Wolverine before? What do you think? I want one for the cool factor alone, but am kinda on the fence if it's worth the cost or not.

It would be awesome not to have to fuss with so many damned muzzle adapters for all my guns.

I’ve shot them, they are average in my opinion, it’s not gonna be perfect on the decibels, but the non tunable gas seems to work on them, but I have ****** luck when I assume.

I’ve been looking at the OSS cans since they direct the gas forward and spent some time at their booth shooting the 7.62 on multiple AKs.

In my opinion, they are about the same sound, the Wolverine is cool looking and I dig what they do, but the OSS is going to keep your rifle cleaner and you’ll never have to get a KNS pistol to adjust with it.

OSS Titanium can is about a 1/2 lb lighter too. Rob Ski had a OSS video if you want to check it out, all in all I’m still torn. I may just do the OSS for AK and get a Nomad so I can buy from Dead Air at the same time because Mike Pappas is a damn good dude every time I’ve spoken with him.


Sent from my iPhone using Tapatalk
 

TrueSeanamus

Plinker
Rating - 0%
0   0   0
Mar 8, 2021
24
3
Indiana
Alright guys, I’m wanting to do some stuff with my beryl buy am having a terrible time finding parts/ information.
1. Does RS regulate still make the BM-1? The little barrel clamp made for mounting lights to? I have been looking for them for months and am on a wait list or two on a couple of sites and haven’t seen them back in stock once.
2. Anyone here have any idea what the bolt carrier on the 7.62 beryl is based on? I’m wanting a zenitco RP-1 for increased comfort when charging the rifle, but it’s based around certain bolt carrier handle types and im not sure if the beryl is based on AK, AKM, or AK74 profile bolt carriers.
Lastly, does anyone on here have any idea how you could convert the beryls “bayonet lug” to actually fit a bayonet? I had a message with Mischaco on YouTube and he said that the hollow type bayonet lug was normal for the Beryl and could be modified to fit a bayonet, but I have no idea how to do that. Seeing as it’s basically a thin metal U I don’t see being able to grind into it to make the lugs and can’t think of anything else that could be done to fit an AK bayonet unless they take some special type of bayonet. Any ideas?

I’m not really sure how to do pictures on here, is it just from the “attach files” button? Guess I’ll give it a test picture. If that works then I’ll know and if anyone needs pictures of the bolt or bayonet lug I can get them for them.
 

Attachments

  • 63D8F37D-4CF2-4248-9BE6-50BF5573A3AB.jpeg
    63D8F37D-4CF2-4248-9BE6-50BF5573A3AB.jpeg
    6.6 MB · Views: 8
Rating - 100%
23   0   0
Mar 26, 2008
2,378
48
Deadman's Hollow
Alright guys, I’m wanting to do some stuff with my beryl buy am having a terrible time finding parts/ information.
1. Does RS regulate still make the BM-1? The little barrel clamp made for mounting lights to? I have been looking for them for months and am on a wait list or two on a couple of sites and haven’t seen them back in stock once.
2. Anyone here have any idea what the bolt carrier on the 7.62 beryl is based on? I’m wanting a zenitco RP-1 for increased comfort when charging the rifle, but it’s based around certain bolt carrier handle types and im not sure if the beryl is based on AK, AKM, or AK74 profile bolt carriers.
Lastly, does anyone on here have any idea how you could convert the beryls “bayonet lug” to actually fit a bayonet? I had a message with Mischaco on YouTube and he said that the hollow type bayonet lug was normal for the Beryl and could be modified to fit a bayonet, but I have no idea how to do that. Seeing as it’s basically a thin metal U I don’t see being able to grind into it to make the lugs and can’t think of anything else that could be done to fit an AK bayonet unless they take some special type of bayonet. Any ideas?

I’m not really sure how to do pictures on here, is it just from the “attach files” button? Guess I’ll give it a test picture. If that works then I’ll know and if anyone needs pictures of the bolt or bayonet lug I can get them for them.

Alright guys, I’m wanting to do some stuff with my beryl buy am having a terrible time finding parts/ information.
1. Does RS regulate still make the BM-1? The little barrel clamp made for mounting lights to? I have been looking for them for months and am on a wait list or two on a couple of sites and haven’t seen them back in stock once.
2. Anyone here have any idea what the bolt carrier on the 7.62 beryl is based on? I’m wanting a zenitco RP-1 for increased comfort when charging the rifle, but it’s based around certain bolt carrier handle types and im not sure if the beryl is based on AK, AKM, or AK74 profile bolt carriers.
Lastly, does anyone on here have any idea how you could convert the beryls “bayonet lug” to actually fit a bayonet? I had a message with Mischaco on YouTube and he said that the hollow type bayonet lug was normal for the Beryl and could be modified to fit a bayonet, but I have no idea how to do that. Seeing as it’s basically a thin metal U I don’t see being able to grind into it to make the lugs and can’t think of anything else that could be done to fit an AK bayonet unless they take some special type of bayonet. Any ideas?

I’m not really sure how to do pictures on here, is it just from the “attach files” button? Guess I’ll give it a test picture. If that works then I’ll know and if anyone needs pictures of the bolt or bayonet lug I can get them for them.

RS guys just cut out a bunch of BM1’s, saw a mess of them last weekend, hopefully they come to the market soon. Keep an eye on their site.

I guess I should have asked if anyone was looking for anything…


Sent from my iPhone using Tapatalk
 

Site Supporter

INGO Supporter

Forum statistics

Threads
490,036
Messages
8,829,574
Members
47,982
Latest member
rodneyw71
Top Bottom