Garandthumb
Plinker
I am consolidating calibers and 300 blackout seems the most logical to eliminate for the time being. Here’s everything I have left, most of it has been opened or has been used. I will note how much is left or if it is new etc etc. Everything has also been stored appropriately and is not very old.
Powder-
1 pound N110 and 1 pound of N105- each have had about 10 rounds loaded out of them. Almost full
Roughly 1 1/4 pound CFE BLK- 1 pound of it is new never opened
1 pound of lil gun- opened but never used
Projectiles and ammo-
(200) Berry’s 220gr spire point, box opened never used
(~125) Sierra Match King 220gr pulls, no marks. My number could be off, could be more or less.
(~90) Lapua 200gr soft point
(>100) 150gr pulled tracers
(~40) Lehigh Defense high velocity close quarters projectiles. These were not for sale for long and are very nasty
(~40) rounds loaded with CFE BLK and berry’s 220gr
(~40) rounds loaded with CFE BLK and SMK 220gr
All loaded ammo and primed cases are being sold as components only
Brass, brass prep, and dies-
A little over 100 clean unprimed mixed headstamp fire formed converted cases
(~40) mixed headstamp converted cases primed with CCI 450’s
(<25) dirty spent cases that never made it to the cleaner
Hornady custom grade 2 die set, full length sizing and seating dies. Both have surface rust from getting moved and never put away but still work fine.
Lee 300 blk trim die- also has surface rust
Drill master 2” chop saw with 300blackout cut off jig
I am asking $450obo for everything, I have way more than that in it all. At this time I would not like to separate it. I am interested in full or partial trades for firearms (I do not have anything in particular in mind) and also for bulk 9mm or 223. Shoot a message my way if you have questions or offers.
Sent from my iPhone using Tapatalk
Powder-
1 pound N110 and 1 pound of N105- each have had about 10 rounds loaded out of them. Almost full
Roughly 1 1/4 pound CFE BLK- 1 pound of it is new never opened
1 pound of lil gun- opened but never used
Projectiles and ammo-
(200) Berry’s 220gr spire point, box opened never used
(~125) Sierra Match King 220gr pulls, no marks. My number could be off, could be more or less.
(~90) Lapua 200gr soft point
(>100) 150gr pulled tracers
(~40) Lehigh Defense high velocity close quarters projectiles. These were not for sale for long and are very nasty
(~40) rounds loaded with CFE BLK and berry’s 220gr
(~40) rounds loaded with CFE BLK and SMK 220gr
All loaded ammo and primed cases are being sold as components only
Brass, brass prep, and dies-
A little over 100 clean unprimed mixed headstamp fire formed converted cases
(~40) mixed headstamp converted cases primed with CCI 450’s
(<25) dirty spent cases that never made it to the cleaner
Hornady custom grade 2 die set, full length sizing and seating dies. Both have surface rust from getting moved and never put away but still work fine.
Lee 300 blk trim die- also has surface rust
Drill master 2” chop saw with 300blackout cut off jig
I am asking $450obo for everything, I have way more than that in it all. At this time I would not like to separate it. I am interested in full or partial trades for firearms (I do not have anything in particular in mind) and also for bulk 9mm or 223. Shoot a message my way if you have questions or offers.
Sent from my iPhone using Tapatalk
Attachments
Last edited:
