*PRICE IS FIRM, please do not send offers as this is already a 40%+ discount over retail and I’m losing significant money as it is. I will not accept an offer lower than my posted asking price!*
I’m the second owner of this fine specimen. I purchased this off GunBroker last fall and had no intention of selling it, but life has other plans.
It’s in fantastic, nearly new condition overall aside from the first owner trying their hand at stippling on a small section under the trigger guard, and a slight under cut that was tastefully done (circled in red). Otherwise, it’s in phenomenal shape!
This started out as a factory PX4 in 9mm. The top end was then sent to LTT for an RDO cut (RMR footprint), Carry levers, an NP3 treatment, and a steel recoil guide rod w/ captured spring. When I got it, I also installed an LTT Trigger Job In A Bag, which includes a Competition trigger group and an LTT trigger bar with everything being stoned and fitted at LTT. I also installed a Stealth slide stop lever and got the competition mag release kit with all three sizes. All factory parts are included (all three backstraps as shown plus factory slide stop, trigger group, and trigger bar), as well as a few spares:
-trigger bar spring
-trigger return spring
-slide stop spring
-steel guide rod w/ captured recoil spring
-11# main spring
Comes with a total of 10 factory Beretta mags, 9x 17rnd mags and one 20rnd. I bought 7 of the mags second hand, three of which have some very small minor rust spots on them. I intended to use these at comps where I could beat the **** out of them and not feel bad, but they all seem to function fine. It also comes with a new set of Talon Grips, and a brand new JM Custom Kydex Wing Claw 2.5 and mag carrier w/ the following stats:
Pistol: Beretta PX4 Carry/Compact Carry (LONG) 9mm
Belt loops: 1.5” DCC clips
Carry side: Right
Color: Black
Extra Tuck
Guard: MID
Hole pattern: Normal
Muzzle Pad: NO
Red Dot Sight Cut: YES
Mag: Beretta PX4 9/40, High Ride
Belt Loops: 1.5” DCC Monoblock
Carry Side: Left (right-handed shooter)
Color: Black
She shoots like a dream and is very accurate and smooth! I intended to move away from Glocks and start carrying this AIWB and using my 92G LTT for competitions, but recent events having me needing to cover some unexpected expenses, so I guess I’ll be keeping the Glocks for awhile yet.
I’m asking$1200 $1175 $1160 $1150 $1125 shipped for everything from my FFL to yours. This would run you ~$1900 new for everything included (LTT charges $1490 before tax/shipping for just the gun), and I don’t think the NP3 option is even available anymore. Throw on an optic of your choosing and you’ll be ready to roll. No trades at this time, please. Cross-posted, the first “I’ll take it” followed by a PM gets it. Payment via discreet PayPal friends/fam, CashApp, or USPS MO. Any questions, just ask. Thanks!
POSSIBLE TRADES (plus cash as needed):
-Hornady 6.5mm 123gr ELD-M or SST
-Hornady 6.5mm 95gr V-max
-Sierra 6.5mm 107gr SMK or 105gr Blitzking
-Speer 6.5mm 90gr TNT
-Lapua 108gr or 123gr Scenar
-Hornady .224” 53gr V-Max (preferred) or 55gr V-Max
-Sierra .224” 65gr Gameking (# 1395)
-Sierra .224” 55gr Blitzking (# 1455) or 55gr Gameking (# 1365)
-Hornady .172 25gr HP
-Hornady .172 20gr or 25gr V-Max
-Nosler .172 20gr or 25gr Varmageddon
-CZ 527 mags in .223 or 6.5G/7.62x39
-Dillon Super Swage 600
-Hornady/Forster/Wilson case trimmer
-.218 Bee brass (new or 1x fired)
-.17 Fireball brass and/or factory ammo
-Vortex Strike Eagle 5-25x EBR-7C mrad
-Athlon Helos BTR2 2-12x AHMR2, 4-20x or 6-24x w/ APRS6 mrad reticle
-Arken EP5 5-25x mrad
-Bushnell LRTSi 3-12x or 4.5-18x
-Bushnell DMR2 3.5-21x
-Timney 2-stage R700 trigger w/ bolt release
-Magnetospeed V3
-AMG Labs Commander shot timer
-KRG Bravo R700
-Grayboe Terrain or Renegade R700
-McMillan HTG, Game Warden 1.0/2.0, Game Scout, A1-3, A3-5, or A5 for an R700SA or FN SPR/M70
-Manners MCS-T/TA, MCS-T3/T3A, EH1, EH4 for an R700SA or FN SPR/M70
-Mossberg 46M(b)
-Mossberg 146b
-Wet/stainless pin rotary tumbler setup
-Used Annealeez or similar
If you’re localish:
-Remington 7.5 SRP
-CCI 41, 450, 250 primers
-IMR 8208XBR
-Hodgdon Benchmark, Varget, H335, CFE223, maybe BL-(C)2
-Ramshot TAC, X-Terminator
I’m the second owner of this fine specimen. I purchased this off GunBroker last fall and had no intention of selling it, but life has other plans.
It’s in fantastic, nearly new condition overall aside from the first owner trying their hand at stippling on a small section under the trigger guard, and a slight under cut that was tastefully done (circled in red). Otherwise, it’s in phenomenal shape!This started out as a factory PX4 in 9mm. The top end was then sent to LTT for an RDO cut (RMR footprint), Carry levers, an NP3 treatment, and a steel recoil guide rod w/ captured spring. When I got it, I also installed an LTT Trigger Job In A Bag, which includes a Competition trigger group and an LTT trigger bar with everything being stoned and fitted at LTT. I also installed a Stealth slide stop lever and got the competition mag release kit with all three sizes. All factory parts are included (all three backstraps as shown plus factory slide stop, trigger group, and trigger bar), as well as a few spares:
-trigger bar spring
-trigger return spring
-slide stop spring
-steel guide rod w/ captured recoil spring
-11# main spring
Comes with a total of 10 factory Beretta mags, 9x 17rnd mags and one 20rnd. I bought 7 of the mags second hand, three of which have some very small minor rust spots on them. I intended to use these at comps where I could beat the **** out of them and not feel bad, but they all seem to function fine. It also comes with a new set of Talon Grips, and a brand new JM Custom Kydex Wing Claw 2.5 and mag carrier w/ the following stats:
Pistol: Beretta PX4 Carry/Compact Carry (LONG) 9mm
Belt loops: 1.5” DCC clips
Carry side: Right
Color: Black
Extra Tuck
Guard: MID
Hole pattern: Normal
Muzzle Pad: NO
Red Dot Sight Cut: YES
Mag: Beretta PX4 9/40, High Ride
Belt Loops: 1.5” DCC Monoblock
Carry Side: Left (right-handed shooter)
Color: Black
She shoots like a dream and is very accurate and smooth! I intended to move away from Glocks and start carrying this AIWB and using my 92G LTT for competitions, but recent events having me needing to cover some unexpected expenses, so I guess I’ll be keeping the Glocks for awhile yet.
I’m asking
POSSIBLE TRADES (plus cash as needed):
-Hornady 6.5mm 123gr ELD-M or SST
-Hornady 6.5mm 95gr V-max
-Sierra 6.5mm 107gr SMK or 105gr Blitzking
-Speer 6.5mm 90gr TNT
-Lapua 108gr or 123gr Scenar
-Hornady .224” 53gr V-Max (preferred) or 55gr V-Max
-Sierra .224” 65gr Gameking (# 1395)
-Sierra .224” 55gr Blitzking (# 1455) or 55gr Gameking (# 1365)
-Hornady .172 25gr HP
-Hornady .172 20gr or 25gr V-Max
-Nosler .172 20gr or 25gr Varmageddon
-CZ 527 mags in .223 or 6.5G/7.62x39
-Dillon Super Swage 600
-Hornady/Forster/Wilson case trimmer
-.218 Bee brass (new or 1x fired)
-.17 Fireball brass and/or factory ammo
-Vortex Strike Eagle 5-25x EBR-7C mrad
-Athlon Helos BTR2 2-12x AHMR2, 4-20x or 6-24x w/ APRS6 mrad reticle
-Arken EP5 5-25x mrad
-Bushnell LRTSi 3-12x or 4.5-18x
-Bushnell DMR2 3.5-21x
-Timney 2-stage R700 trigger w/ bolt release
-Magnetospeed V3
-AMG Labs Commander shot timer
-KRG Bravo R700
-Grayboe Terrain or Renegade R700
-McMillan HTG, Game Warden 1.0/2.0, Game Scout, A1-3, A3-5, or A5 for an R700SA or FN SPR/M70
-Manners MCS-T/TA, MCS-T3/T3A, EH1, EH4 for an R700SA or FN SPR/M70
-Mossberg 46M(b)
-Mossberg 146b
-Wet/stainless pin rotary tumbler setup
-Used Annealeez or similar
If you’re localish:
-Remington 7.5 SRP
-CCI 41, 450, 250 primers
-IMR 8208XBR
-Hodgdon Benchmark, Varget, H335, CFE223, maybe BL-(C)2
-Ramshot TAC, X-Terminator
Last edited:
