Hey guys! I have a problem that I've spent WAY too much time trying to figure out. I want to mount a Holosun HS507C-X2 w/ ACSS Vulcan to my P365XL. The P365XL has a "RMSc footprint". I need to convert that footprint to a regular RMR footprint for the optic. I don't know if my Googlefu is this...
IN NEED OF IDEAS!
So I received the CRKT Provoke for Christmas from my wife. Awesome knife.... with one issue.
I wore it IWB all day yesterday. So knife IWB, clip OWB, but under my belt. Carries super deep and completely disappears. But when I got home yesterday, I untucked my shirt and found...
Hey guys. I have a brand new Surefire M6000DF with a Surefire tape switch. Shot with it once so far. Messing with it today, I noticed the light was very dim. I slightly loosened the head, and it's full power now. Tighten the head again, and it's dim. I threw out the box and manual a while ago...
***FREE SHEEPDOG GEAR T-SHIRT MADE BY NINELINE APPAREL TO ANYBODY THAT CAN FIGURE THIS OUT!
Hey guys! Looking for some guidance here from the computer nerds. I'm pretty computer savvy myself, so feel free to speak in techy lingo. I'll understand. Ha ha!
Ok. So I have a maxed out HP Pavilion...
Hey guys! Thanks in advance for any help! So I'm installing a 2000 W inverter in the Jeep. As pictured below, I'm using 1/0 AWG cable and a 200 amp fuse. Hopefully I'm at least good to go there.
Issue is, I don't want to kill off my main battery when I'm working out of the back of the Jeep. Has...
I know it's a long shot, but does anyone have a $1K Home Depot, Amazon, or eBay gift card they'd like to exchange for a $1K Botach gift card code? Even if it's $500 from one of those three and $500 from another. Bonus points if anybody has a nice Home Depot coupon on top of it. Thanks guys...
I'm about due for some upgrades, and a short visit to Dewalt's website is leaving me a little confused. :n00b:
What I'm mainly looking for is battery cross compatibility. Do 20v max tools accept 20v XR batteries? Do 20v XR tools take 20v max batteries? Does the 20v max and 20v XR tools take the...
Setup: (Always on due to business)
- Windows 10 64 bit
- Custom HP Pavilion 17t laptop (bought new a couple months back)
- New LG 27UD58-B secondary monitor connected via HDMI
Problem: (Only started happening after I restarted the laptop this morning. NEVER happened before.)
- LAPTOP monitor...
I don't know how often FN updates their products. My luck, I'll order this up and they'll come out with a "gen II" come Shot Show in a few days. So what would you guys do?
I just placed an order for the 540 piece Craftsman tool set just ASSUMING they are the same old "USA FORGED" tools I've bought in the past. I typically research everything and run it over with a fine toothed comb before I buy. Didn't think I had to with a company I thought was as American as...
Hey guys! In the middle of setting up a little 300 BLK. I want to tuck my YHM Phantom Ti 7.62 up under some handguards. So, I'm looking for the lightest possible handguards with an inside diameter over 1.6". Can anybody think of anything suitable before I scour the internet to no end? My...
Hey guys! I don't have the scope in hand, so I can't measure and compare it to Butler Creek's chart. I need to know which Butler Creek scope covers fit the Diamondback HP 2-8x32. Front and back. If anybody can help, I'd greatly appreciate it. Heading out hunting with this and need to get these...
Love my Zastava M70AB2 and PAP M92, but I still just like the idea of an American AK. So who takes the cake? (Price is practically the same at $700 - $750.)
PSAK-47 GB2 Classic Red Rifle
Introducing the PSAK47 GB2 Classic Red Wood rifle!
A quality American standard AK built in America, with...
To anybody who can help, I need a little advice for a family member. I'll try and keep this short and to the point....
In 2009, unknown to her, her husband put a medical bill in her name. (Husband now deceased.) Originally $3000, but with interest and fees, it's now over $9000. Both parties are...
Anybody know if it's possible to fit Magpul AK handguards on a VEPR 12? Next option would be the Chaos keymod handgards, but I'd rather run the Magpul if I can. Thanks in advance!
Hey guys! I've been running Windows 10 for a little while now. (Bought a Samsung TabPro S). Was in the middle of working and my Bluetooth mouse stopped working. Didn't think it was battery related, but I replaced them anyhow. No dice. Went into my network connections to reset them, and to my...
Hey guys! I haven't been HEAVY into the computer market since college, but I'm in need of a secondary computer. It would mainly be used to connect to my office hard drive and kind of be my "go everywhere with me workhorse". I'm really liking the idea of the Surface Pro 4, but there are a couple...
I'll try and keep this short and to the point, so here it goes....
Installed an Amcrest 8 channel video security system (wired). Issue I'm having is that the DVR is half way across from my router. Without running CAT5 through a finished basement, is there a way to get the two connected...
Seems ever since FN jumped into the AR market with their own rifles, PSA has been heavily pushing their other offerings. (PTAC, Freedom, stainless steel, melonite, nitride). And now, it looks like the days of "PSA Premium" and "PSA CHF", (both FN manufactured) uppers are coming to an end.
I...