CZickiness XXXVIII Reboot. To Honor a friend

[gmcttr]

...Tarzan said that I should just compensate by purposely aiming high&right...and being he's a pro-level shooter, I bet that he's correct.

I'd be willing to bring a vise and rubber mallet to the range and tweak the barrel until it shoots straight.

 

[MindfulMan]

I'd be willing to bring a vise and rubber mallet to the range and tweak the barrel until it shoots straight.

I might take you up on that....although I'm concerned whether the front sight is very pliable.
It's awfully small compared to other SA sights that I've seen.

 

[MindfulMan]

Ohhh....you said "the barrel" !!!! Oh, heck no !

 

[gmcttr]

Got the shipping notification for the 97B...WOOT !

CZ

 

[gmcttr]

You want a crescent wrench or other parallel jawed pliers to bend the sight and tape to protect the finish.

 

[MindfulMan]

CZ, for sure.....but let's also holla' out BCM ! (my upper is due to arrive tomorrow)

 

[MindfulMan]

You want a crescent wrench or other parallel jawed pliers to bend the sight and tape to protect the finish.

Aha ....smart !

 

[88E30M50]

I'd be willing to bring a vise and rubber mallet to the range and tweak the barrel until it shoots straight.

Just don’t bend the barrel too much. You don’t want the bullet to make a circular run and shoot yourselves in the ass

 

[MindfulMan]

Just don’t bend the barrel too much. You don’t want the bullet to make a circular run and shoot yourselves in the ass

 

[Biggredchev]

Federal had 9mm ball in stock for $35/100 rounds limit 2. Got my order placed, went back to order the Mrs.BRC some and it was gone lol

 

[WebSnyper]

Just don’t bend the barrel too much. You don’t want the bullet to make a circular run and shoot yourselves in the ass

 

[Bennettjh]

Got the shipping notification for the 97B...WOOT !

CZ

 

[ChrisK]

Got the shipping notification for the 97B...WOOT !

CZ

Now when it shows up the slide gets sent to CGW for the 1911 bushing conversion. When it returns then goes to the Wizard for his upgrades. Should be ready for the SGE...

 

[gmcttr]

Now when it shows up the slide gets sent to CGW for the 1911 bushing conversion. When it returns then goes to the Wizard for his upgrades. Should be ready for the SGE...

I'm not likely to upgrade this one. If I do, I'll install CGW parts and polish whats needed myself. Been doing my own gunsmithing since the 70's.

 

[churchmouse]

Stopped in at 500 guns this morning to see the owners who are old friends of mine. They seem to have a decent selection of handguns and long guns in the display. They will sell ammo with a gun sale.

Joe and Guy Montgomery. Great peoples.

 

[JEBland]

Stopped in at 500 guns this morning to see the owners who are old friends of mine. They seem to have a decent selection of handguns and long guns in the display. They will sell ammo with a gun sale.

Joe and Guy Montgomery. Great peoples.

Been in there a couple times. Picked up a little AYA 12 ga with beautiful case colors once. Kicked myself for not picking up an old Iver Johnson single shot to practice refinishing on.

 

[ChrisK]

I'm not likely to upgrade this one. If I do, I'll install CGW parts and polish whats needed myself. Been doing my own gunsmithing since the 70's.

I know you can, just razzing

 

[gmcttr]

I know you can, just razzing

I have usually ordered the CGW parts before I have the pistol. Shooting RR's 97B Sunday made me think I could leave it alone. We'll see how long that lasts.

 

[Bennettjh]

Stopped in at 500 guns this morning to see the owners who are old friends of mine. They seem to have a decent selection of handguns and long guns in the display. They will sell ammo with a gun sale.

Joe and Guy Montgomery. Great peoples.

I don't think I've ever heard of them. I assume they're around the track?

 

[Benp]

I have usually ordered the CGW parts before I have the pistol. Shooting RR's 97B Sunday made me think I could leave it alone. We'll see how long that lasts.

Mine feels good just like it is so far too though I haven't taken it to the range yet. We are just hanging out right now and getting to know each other.